isellpower
TYF Newbie
On both models the front doors and windows are operational. The rear window switches are dummy switches. I found a couple on ebay pretty cheap. The wiring harness is still there, just pull the panel and pop them in place. On the rear doors the door handle linkage is removed as well. I had to get those from the dealer, just one piece per side. Easy install. I think it was about 8 bucks each.
Both rear doors and windows are fully functional now.
One other thing I ran into on the rear was that although they put in the original (still new) back seat, there were no seat belts. LOL. What I found was that they were installed at the factory but were left behind the side pillar covers, still neatly zip tied. This was because they put in the prisoner cage and partitions at wherever agency they wind up at. All I had to do was order the anchor bolts(which are special bolts, don't use standard bolts). Again, easy and surprising fix.
Shoot, I passed on 2 really nice, low mileage PPV's due to the rear window/lock control issues. I had no idea the wiring was still there.