The Plasti Dip Thread

[05Single]

Using all new trim, rubber, seals, etc when I put it back together really made it look good

Nice! That white was clean. Only BMW I would own would be a E36

 

[05Single]

Welp that didn't last long lol. All of 3 days. Lol
Peeled off great tho




Then I changed my mind and put it back

 

[05Single]

Comparison shots. It layed down even and smooth, just wasn't the look for my taste.

Night comparison pics. The tail with dip is blurry , almost looks like the camera didnt focus but it is focused. The tail without dip has more reflection(we knew that already lol) But side by side for the most part the light output is the same.


Fyi The tail without dip looks like it doesn't match with the red colors but the camera doesn't like the leds next to the halogens and make the halogens look pink. But I assure you it looks more uniform to the naked eye. All i have is a my phones camera atm.

 

[kwOH]

Welp that didn't last long lol. All of 3 days. Lol
Peeled off great tho
View attachment 186813 View attachment 186814 View attachment 186815 View attachment 186816



Then I changed my mind and put it back View attachment 186817

Lmao I like it back on. The plasti-dip smoke is not the best, I put like 20 coats on mine and it just turned them matte grey, nothing like nightshade, which is what I thought it would be, like a peelable version.

 

[05Single]

Lmao I like it back on. The plasti-dip smoke is not the best, I put like 20 coats on mine and it just turned them matte grey, nothing like nightshade, which is what I thought it would be, like a peelable version.

I seen a guy use one coat of plastidip black and a couple of gloss on top and they looked decent and were actually dark. This smoke never really gets dark. Just gray and more blurry lol.
I'm lightly niteshading my tails next.

 

[kwOH]

I seen a guy use one coat of plastidip black and a couple of gloss on top and they looked decent and were actually dark. This smoke never really gets dark. Just gray and more blurry lol.
I'm lightly niteshading my tails next.

Ive seen videos of people doing the black and gloss, but unlike the smoke its not an actual translucent product like the smoke is, thats why it doesn’t cover as well.

 

[shreksbrother]

Thanks man!
And only Denalis and escalades come with those side covers. Just the covers alone really clean up the engine bay imo. I bought mine off a member on here.
Post up pics of yours.

I'll have to keep an eye out for those engine covers in the junkyard!

Center portion of front grille and chrome portion of front bumper:

 

[Glisella]

I've had my emblems (front and back) plasti-dipped matte black since the days I got the cars. 13 Malibu picked up in October 2012 (5 years) and 2008 Yukon XL Denali picked up in May 2014. (3.5 years) Never had to re-apply, I keep the chrome around the bowtie and GMC rather than spray that too. Ignore the pic where I'm changing my hubs.

 

[jarydM]

This was my latest dip project:

View attachment 186576

It can get a little tricky with taping/peeling. I experimented a bit, which is one of my favorite things about the dip. Try it, peel it, try again. I found that the best way to get a sharp edge is to lay it on good and thick, and peel your tape while it's wet. Otherwise the stuff sets up over your line, and the whole shootin match will come up with the tape. You can tape over once it's dry, and peel without a problem. In this case, I taped and did the whole bow tie red with one heavy coat and peeled the tape right away. After the red dried, I taped to the smaller section, and did the same thing with the black. I also used the Duplicolor Custom Wrap gloss clear over the top of the whole cap at the end. Turned out pretty well.

Not surprising, but this is EXACTLY what I had planned for my center caps. Which colors did you use?

They look excellent. #twinning

 

[HiHoeSilver]

Not surprising, but this is EXACTLY what I had planned for my center caps. Which colors did you use?

They look excellent. #twinning

Just straight up red and black.