Think I blew the fuse for my steering wheel lights

[80zfreak]

I've been working on all of the burned out interior lights on our 2004 Tahoe. I replaced all the burned out steering wheel lights with LED's. I did them one at a time and tested each one after completion. I had three done and had finished the forth one and went to check it. I apparently did something wrong because the second I hooked it up all of the other steering wheel lights went off and I can't get them to work. The functions of all the switches still work, they just won't light up. Is there a fuse anywhere for just these lights? I did some research and one of the diesel forums said there is an inline fuse connected to a brown wire somewhere in or under the steering column. I couldn't see the pictures that were posted on the thread though.

 

[Mr. 960]

I did the whole clock spring conversion to add steering wheel controls to an old 04 truck I had. I don't remember any inline fuse. Perhaps all the LED lights burned out somehow. Do the other dash lights still work?

Mr. 960

 

[WildernessJeep]

In case you didn't get an answer to this, here is the link:

http://www.duramaxforum.com/forum/how-tos-diy-write-ups/114764-fuse-steering-wheel-control-lights.html