Thoughts on these angles?

[cjweb11]

friend of mine at work recently put a 2.5" front level on his new 2014 chevy 2500. he believes it is a procomp kit. i took a pic of this cv angles etc. because they looked a bit extreme, coming to y'all for opinions.

also a pic of the angles on my 07 tahoe w/ 2.5" leveling kit for another reference

 

[ABCman]

I typed a long post thinking you said the truck was a 1500, and then realized you said 2500. Since its a 2500 just tell him to decrank the torsion bars some. Those angles look pretty steep and I'm sure it rides terrible.

 

[OR VietVet]

X2. That angle on the cv axle is too much. Gonna cause problems soon. How did the alignment angles look on the printout? I would also expect some bump steer on the tie rod angle.

 

[livingez_123]

Bad angles, the bottom picture looks good.

 

[cjweb11]

X2. That angle on the cv axle is too much. Gonna cause problems soon. How did the alignment angles look on the printout? I would also expect some bump steer on the tie rod angle.

i think he also mentioned not having done an alignment yet.

 

[Zed 71]

x3 on the 2500 CV angle.

The bottom pic of the Tahoe looks good. Is that using a bottom strut spacer?

 

[OR VietVet]

If he doesn't align eventually, when he gets those angles taken care of, he is again asking for trouble. IMO By the way, I reread the post, and did not see where he mentioned the alignment one way or the other.

 

[cjweb11]

x3 on the 2500 CV angle.

The bottom pic of the Tahoe looks good. Is that using a bottom strut spacer?

it's the Truxxx 2.5" adjustable kit. bottom strut spacer for 1" lift, then 3 stackable plates on top each adding 0.5". i think the kit is still available but not under the Truxxx name anymore, could be wrong tho

 

[yates ™]

Looks like it rides horrible.