Tire Noise Reduction -- Any Experiences with Fender Liner and/or Fenderwell Treatments?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Scrappycrow

Full Access Member
Joined
Dec 22, 2023
Posts
106
Reaction score
128
Location
Alpharetta, Georgia
Y'all,

First off, this is not a generic "How can I make a vehicle quieter?" type of query asking for a complete education on the subject from zero knowledge. I'm fairly knowledgeable about the various products out there, how to use them, and I've successfully treated multiple other vehicles, but have done no work in this area on my '13 Tahoe LTZ. Before anyone asks: 1) the tires are Michelin Defender LTX M/S which are evenly worn, with about 1/3 tread depth left (and the noise doesn't change between tire rotations), and 2) all of the fender liners are intact and properly attached, the body panels and doors fit properly, and all of the seals (door and window) are in excellent condition. Wind noise is minimal.

So, does anyone have any experiences with using constraining layers (e.g. Dynamat) and/or absorption layers (e.g. ResoNix Fiber Mat) on the interior side of the fender liners and/or the metal portions of the structure? Did it make a noticeable difference? Any "not worth the time" feedback?

I'm aware of this thread, which doesn't cover my query. If there are threads that address this particular subject (fender liner and/or fenderwell treatments), I have not run across them.

Thanks in advance,
Scrappy
 

Matthew Jeschke

Full Access Member
Joined
Dec 28, 2017
Posts
1,982
Reaction score
1,377
Location
Sahuarita, Arizona
Not sure if I'd want to use Dynamat or similar style insulation on areas outside the cabin. I think that stuff is designed for use inside the cabin where moisture and elements are less of a concern. If just the plastic fender liners, might be okay to try. But on metal, I'd be reluctant. You could risk getting moisture trapped over time and degrading the metal. If you do do it on metal I'd be REALLY sure it's sealed well before applying anything to the surface of the body panel.
 

mikez71

Full Access Member
Joined
Mar 9, 2023
Posts
1,346
Reaction score
1,568
Maybe rhinoliner or similar on the bottom/front of the cab, definately put something in the rear wheel wells. You can really hear the road noise with the interior panels off in the back. The factory put some caulk deadener on the inside of the rear wheel wells already.
IMG_4511.jpg
Maybe more jute padding tucked in behind the plastic panels as well. You do have that matting in the front fender/door gap right? I took mine out because I didn't like the idea of fabric trapping junk in there and getting soggy. No regrets, but it did seem to help a tiny bit with noise.
 
Last edited:
OP
OP
Scrappycrow

Scrappycrow

Full Access Member
Joined
Dec 22, 2023
Posts
106
Reaction score
128
Location
Alpharetta, Georgia
Not sure if I'd want to use Dynamat or similar style insulation on areas outside the cabin. I think that stuff is designed for use inside the cabin where moisture and elements are less of a concern. If just the plastic fender liners, might be okay to try. But on metal, I'd be reluctant. You could risk getting moisture trapped over time and degrading the metal. If you do do it on metal I'd be REALLY sure it's sealed well before applying anything to the surface of the body panel.
There won't be any issue with using Dynamat outside the cabin. The black gooey layer is butyl rubber, which is frequently used on the exterior of vehicles as a sealing compound itself, and that's what adheres the mat to the surface. So long as you roll it down properly, which includes the edges, it seals itself to the surface. Yes, you'd need to pay attention to any cracks/seams where any water could get behind, but this is not something I'd be doing ham-fistedly and I'd account for that (either sealing any crack/seam or not laying the material over it).
Maybe rhinoliner or similar on the bottom/front of the cab, definately put something in the rear wheel wells. You can really hear the road noise with the interior panels off in the back. The factory put some caulk deadener on the inside of the rear wheel wells already.

Maybe more jute padding tucked in behind the plastic panels as well. You do have that matting in the front fender/door gap right? I took mine out because I didn't like the idea of fabric trapping junk in there and getting soggy. No regrets, but it did seem to help a tiny bit with noise.
Thanks for the suggestions! Yes, the matting in the front fender/door gap is present and properly situated.
 

petethepug

Michael
Joined
May 4, 2016
Posts
2,961
Reaction score
3,193
Location
SoCal
Closed cell foam / CCF is incredible for stuffing in voids and cavities to isolate areas on the exterior you can follow up with a permanent solution like rhino liner or lizard skin.

I can tell you that by doing hushmat on the roof and CCF on the interior of the rear wheel wells of my two door coupe, it took the noise down by 50%.

I had increased the hp/tq, tire width, exhaust diameter, boost and added a free flow exhaust. The roof & rear 1/4 panel insulation made it quieter than when it was stock
 

Forum statistics

Threads
132,054
Posts
1,861,649
Members
96,510
Latest member
mello1420
Top