Tonyrodz's Tahoe Build Thread

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Scottydoggs

Full Access Member
Joined
Dec 16, 2017
Posts
2,657
Reaction score
4,000
Location
NJ
are you driving it during these scans or just holding the gas? being under load can change things, vs revving it.

the ltft are rich, might have a vac leak or the tune was set up to be rich.

the o2's look good as far as being very active, the test for them is go wot and bank 1 and 2 sensor 1 should lock in around 930's and stay there the whole time your wot.

misfires, well ya got a cam. why tuners delete the multiple misfire code from the tune. or the cel would be flashing all day long on most larger cams.
 
OP
OP
Tonyrodz

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
31,698
Reaction score
47,402
Location
Central Jersey
are you driving it during these scans or just holding the gas? being under load can change things, vs revving it.

the ltft are rich, might have a vac leak or the tune was set up to be rich.

the o2's look good as far as being very active, the test for them is go wot and bank 1 and 2 sensor 1 should lock in around 930's and stay there the whole time your wot.

misfires, well ya got a cam. why tuners delete the multiple misfire code from the tune. or the cel would be flashing all day long on most larger cams.
Sorry I didn't clarify @Scottydoggs this is my work van. I was sitting still bring the revs up. This van has given me heartache from day 1!
 

kbuskill

***CAUTION*** I do my own stunts!
Joined
Mar 11, 2017
Posts
5,311
Reaction score
8,328
Location
NE. FL.
are you driving it during these scans or just holding the gas? being under load can change things, vs revving it.

the ltft are rich, might have a vac leak or the tune was set up to be rich.

the o2's look good as far as being very active, the test for them is go wot and bank 1 and 2 sensor 1 should lock in around 930's and stay there the whole time your wot.

misfires, well ya got a cam. why tuners delete the multiple misfire code from the tune. or the cel would be flashing all day long on most larger cams.
LTFTs are rich???

I thought positive numbers meant lean, which would indicate a possible vacuum leak.

My understanding is that the positive numbers mean that the ECU is calling for 9% more fuel (as an example). A negative reading would indicate that it was rich and the ECU was calling to reduce the fuel by -9% (as an example).

Maybe we are saying the same thing in a different way OR maybe I am mistaken. Not trying to confuse, just trying to verify my thinking is correct.
 

George B

¯\_(ツ)_/¯
Joined
Feb 5, 2020
Posts
7,789
Reaction score
18,674
Location
Oconomowoc, Wisconsin 53066
LTFTs are rich???

I thought positive numbers meant lean, which would indicate a possible vacuum leak.

My understanding is that the positive numbers mean that the ECU is calling for 9% more fuel (as an example). A negative reading would indicate that it was rich and the ECU was calling to reduce the fuel by -9% (as an example).

Maybe we are saying the same thing in a different way OR maybe I am mistaken. Not trying to confuse, just trying to verify my thinking is correct.
Your saying the same thing. It appears to be adding fuel to compensate for unmetered air.
 

Scottydoggs

Full Access Member
Joined
Dec 16, 2017
Posts
2,657
Reaction score
4,000
Location
NJ
LTFTs are rich???

I thought positive numbers meant lean, which would indicate a possible vacuum leak.

My understanding is that the positive numbers mean that the ECU is calling for 9% more fuel (as an example). A negative reading would indicate that it was rich and the ECU was calling to reduce the fuel by -9% (as an example).

Maybe we are saying the same thing in a different way OR maybe I am mistaken. Not trying to confuse, just trying to verify my thinking is correct.
your right, i got it backwards. and lean would mean a vac leak. could also cause some misfires.
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,005
Reaction score
50,865
Location
Oregon
I did drive it today, but I couldn't take it through its paces unfortunately. My gf was with me and she has some serious issues with her neck and spine--plates and screws--but hopefully I'll be able to soon.
New issues with her or old? You’ve been through a bit yourself lately so I hope you weren’t both laid up at the same time?
 

Forum statistics

Threads
132,668
Posts
1,872,329
Members
97,473
Latest member
arto832
Top