Torque converter failure $3898 repair quote

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

SethSwitch

Member
Joined
Jan 11, 2016
Posts
56
Reaction score
6
Hello All,
So last weekend I felt my tranny slip in my 2010 tahoe(93,000 miles). I took it in to a shop that specializes in transmissions to have them diagnose the issue. They found that the torque converter failed and metal went through the entire transmission burning up clutches clogging the tcm etc. I was quoted $3898 to replace all the clutches install a hd torque converter as well as put in a new tcm and clean out all of the lines. I am just wondering if this sounds reasonable. I am pretty pissed that this happened as I had the trans cooling line replaced about 2 months ago and the mechanic didn't refill the fluid to the proper level causing the issue. I was also quoted $4100 in parts alone if I wanted a new transmission.
Thanks,
Seth
 

iLikeEggs

Potato!
Joined
Sep 4, 2015
Posts
804
Reaction score
282
Location
Oregon, USA
Shop around. My local Atco shop quoted me $2400 for rebuilding my Trans. Hopefully your guy isn't the only game in town. I you can remove it yourself you may be able to find a shop that will do an exchange for much cheaper.
 

nharkey85

Full Access Member
Joined
May 24, 2015
Posts
282
Reaction score
112
Location
Alabama
find another shop, new trans from gm is only around $2500 (after core charge)if you can do it yourself....
 

adventurenali92

Full Access Member
Joined
Feb 16, 2015
Posts
7,391
Reaction score
8,620
Location
Big Bear Lake, ca
I spent 2200 on a full rebuild for mine in April. And that's in California where everything is more expensive. I think that shop sounds like a rip off. Shop around a bit.
 

sumo

dn ʇǝƃ ʇuɐɔ & llǝɟ ı
Joined
May 21, 2010
Posts
5,752
Reaction score
1,250
Location
rhode island
Well I'd try the cheapest route 1st. Trans system flush and maybe an additive. It may work
 

retiredsparky

Full Access Member
Joined
Jul 9, 2016
Posts
379
Reaction score
121
A flush will not work. When the valve body (the device that controls the hydraulics in the transmission), the clutch pistons, the gears and bearings, the torque convertor and pump etc. get contaminated with particles, there is no way a flush is going to clean out all of those little passageways. It is hard enough to clean out the tranny cooler to prevent contaminating the new tranny.

Continue to price torque convertor, transmission from GM and installation.

The TCM cannot be contaminated or damaged by a blown tranny. It is an electronic device.
 

CO-Texan

TYF Newbie
Joined
Jun 18, 2015
Posts
9
Reaction score
1
I'm surprised they didn't tell you, "You're gonna need a new rear end too cuz all those shavings went down the drive shaft."
Look for a rebuilt trans and ask some buddies to help. Good Saturday project.
 

Forum statistics

Threads
132,440
Posts
1,868,234
Members
97,129
Latest member
Ccollins0408

Latest posts

Top