Torsion key pics please!

[96blacktahoe]

I just ordered my lift. 3 inch torsion keys and 2 inch rear blocks. I've already got the blocks installed and I'm gonna do the keys this weekend. I'm just verrrry curious of how my tahoe is going to look! Please post pics if you have 3 inch torsion keys! Thank you!

 

[SunlitComet]

Actually I would be more worried on how the suspension is going to feel. That will be a lot of stress on the front IFS.

 

[2doorbamahoe]

2in keys. And cranked maybe an inch but I didn't have to crank it till I put bumper on.

 

[96blacktahoe]

Thanks bud that thing looks great! 35's or 33's?

 

[2doorbamahoe]

285/75/r16 bfg km2. 33s

 

[bowtiefreak]

I'm willing to bet your stock keys give the lift you are after. Before you rip the front end apart try it. cranking stock keys is the same as adding differently indexed keys.

 

[96blacktahoe]

Yeah I actually cranked them to almost where they're hitting the bump stops and I'm still at a helluva rake. I probably got about 1.5 to 2 inches. I've seen some obs Chevys with the same keys I have and they so get the whole 3 inches outta the aftermarket keys. I know I'm playing with fire with the front end. Lol

 

[bowtiefreak]

The ride will be harsher too since the travel of the suspension will be limited. As long as you are aware of the bad side effects. In my opinion 3" of crank is a lot.

 

[SunlitComet]

Rake is good. Be one with the rake.