Tow hook mod FINALLY complete / Instructions & Pics (Pic Heavy)

[BlaineBug]

Completed.

 

[Cody R]

Bumping an old thread since it was super helpful finding this information. I added tow hooks to my 2019 Yukon; because living in Montana, sometimes four wheel drive isn’t enough. The lower fascia and black hooks came out to about $150 from my local dealership.

 

[Thrust]

Looks good!

 

[Blackcar]

Just finished installing toe hooks on my 17 Yukon OPs write up spot on the masking tape around filler and fog bezel is scratch saver for me. One thing is not torquing hooks until you see if hooks are in center of filler openings. Thanks for write up.

 

[Sparksalot]

I used tape as well. Mainly to see my measurements and cut lines clearly.





Then pretty well hid them.

 

[BlaineBug]

What am I seeing - were you upgrading from hooks to bumper or the other way around?

 

[olyelr]

I used tape as well. Mainly to see my measurements and cut lines clearly.

View attachment 389832
View attachment 389833


Then pretty well hid them.

View attachment 389834

Are those hooks even accessible for use (even without the bumper guard, which makes them look completely inaccessible/usable)?

 

[Sparksalot]

Are those hooks even accessible for use (even without the bumper guard, which makes them look completely inaccessible/usable)?

Camera angle. They'll need a soft shackle, but so do the NNBS Hoes.

 

[BlaineBug]

Camera angle. They'll need a soft shackle, but so do the NNBS Hoes.

Did you replace the bumper with hooks or the other way around?

 

[Sparksalot]

Did you replace the bumper with hooks or the other way around?

Neither was there to start.



They both coexist quite happily.