TPMS replacement

[treehan77]

I'm using the 2015 wheels with those style tpms sensors, I guess they don't have he same nut or any nut maybe. I'll gamble on he dormans I guess

 

[osiris94ej]

http://www.ebay.com/itm/121835709892?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

I used these in my Moto 970's and work just fine in my 04. They pre program them before they ship them out. All i had to do was install them in my wheels, learn the sensors and have been working like factory for the 3 weeks or so they have been in.

 

[David Paul]

Here's my question for you guys. 2004 Tahoe, I have never seen actual tire pressure on the DIC but have seen the low pressure warning. Replaced wheels (new to me 20's) and bought new AC Delco sensors of Amazon. Went to STS (tire store) to get an alignment and replace sensors. They stated they do not program sensors they didn't sell. I've read the reprogramming procedure in the manual but don't think that is all I need to do to get the sensors to work.
How do I get the initial programming for the sensors done? Thanks, appointment is tomorrow.
I have it figured out after all......

 

[treehan77]

Put the Dorman 974-007 sensors from Amazon ($31 each) into tmy 2016 Sierra rims i have on my 05 Yukon. Works great, finally i don't get scolded to check Tire Pressure system every time i start the truck. @David Paul, the programming procedure is all you need to do. The sensors will start reading actual pressure after you've driven a few miles, not immediately after the procedure.

 

[David Paul]

David Paul[/USER], the programming procedure is all you need to do. The sensors will start reading actual pressure after you've driven a few miles, not immediately after the procedure.

Yup, that's how I figured it out....lol