trailer connections messing with truck

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

chevyguy3766

TYF Newbie
Joined
May 14, 2009
Posts
20
Reaction score
0
Location
south carolina
every time i tow my trailer...i go to put the right blinker on and it lights up and stays on but the left blinker works fine(on the truck).and also when im towing, my cruise controll doesnt work..when i driving with the truck by itself everything works fine..how could the trailer connnections mess with my blinkers and cruise control
 

bowtiefreak

No Quarter
Supporting Member
Joined
Apr 30, 2009
Posts
5,404
Reaction score
100
Location
Near Philly
There is a short in the trailer wiring is my guess that is causing the flasher to stay on. Not sure about the cruise control though.
 

"350Vortec"

*Tahoeless, For now*
Joined
May 3, 2009
Posts
1,238
Reaction score
1
every time i tow my trailer...i go to put the right blinker on and it lights up and stays on but the left blinker works fine(on the truck).and also when im towing, my cruise controll doesnt work..when i driving with the truck by itself everything works fine..how could the trailer connnections mess with my blinkers and cruise control

Sounds about what happend to my truck, Except my brake lights and dricing lights didnt work. Not sure about cruise control though. Take the ground of the trailer wiring harness, Clean to bare metal. And spray out and clean connectors. Should work afterward. Worked for me believe it or not. A guy from a garage down the road from me has the same truck as me, and he says these trucks always have problems with trailer wiring.
 

95TwinTT

Full Access Member
Joined
May 23, 2009
Posts
357
Reaction score
0
Location
Minnesota
every time i tow my trailer...i go to put the right blinker on and it lights up and stays on but the left blinker works fine(on the truck).and also when im towing, my cruise controll doesnt work..when i driving with the truck by itself everything works fine..how could the trailer connnections mess with my blinkers and cruise control

There must be some wires crossed either in the trailer or the wiring harness at the rear of your truck.

The cruise must be seeing +12 on the brake light line. It is designed to release when the brakes are on. In other words, the cruise will not work while the brakes are on…….. :)
 

Forum statistics

Threads
132,730
Posts
1,873,292
Members
97,559
Latest member
blanchard7684

Latest posts

Top