trans problems , usual with 4L60E !

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Tahoe75

TYF Newbie
Joined
May 26, 2011
Posts
8
Reaction score
0
Location
Paris , France
hi guys

I have a problem on my Chevy Tahoe, 1997, 150k miles 5.7 Vortec and 4L60E. and I have several problems that I think are due to electronics: I have no speedometer, no tachometer, no shift position light, and often it starts in 3rd. I have no kickdown either.

I think the solenoid transmition, the default code tells me "torque converter malfunction, shift solenoid A, B shift solenoid .

what do you think? in France, everybody changes these transmition, without seeking the problem.
 
Last edited:

96ProCompTahoe

Full Access Member
Joined
Apr 30, 2009
Posts
2,606
Reaction score
11
Location
IN
i would start by checking the plug on the side of the trans to make sure there are no problems with the wiring. sounds more like a wiring/computer problem than a trans problem (as i assume you are still driving the truck and its shifting?)

the 4l60E's are problems in every country :) and usually require rebuild or replacement.
 
Last edited:
OP
OP
Tahoe75

Tahoe75

TYF Newbie
Joined
May 26, 2011
Posts
8
Reaction score
0
Location
Paris , France
thank you for your reply.

I suppose you drive less than in the U.S. abruptly in europe? I thought the tranny was longer with you.

I checked the wiring on the side of the trans, there is an electronic module on the left side near the kickdown cable.

I checked with the OBD 2 , for him it is a problem of solenoid.
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
188
Location
unknown at this time.
Box on left side of cable are pressure switches for gear indication nuetral safety...

Check for a burned fuse #20 it supplies power for tranny. we will start from there.
 
OP
OP
Tahoe75

Tahoe75

TYF Newbie
Joined
May 26, 2011
Posts
8
Reaction score
0
Location
Paris , France
hello

I checked the voltage coming to the fuse "20 and it is good.

the shift solenoids A and B was good

I noticed that the solenoid pushing a spring loaded piston in the valve body, but one of them sinks does not return
 

Forum statistics

Threads
132,268
Posts
1,865,075
Members
96,831
Latest member
FPinzon

Latest posts

Top