Trouble wiring line out converter

[jksb1982]

Hello all Im having trouble wiring my line out converter to my 2002 yukon. This yukon has a uq3 radio with factory sub. It has two plugs for the radio and im needing a wiring diagram to see which wires are speaker wires so i can tap into them . I have searched and cannot find anything hoping someone has seen this and can help. Thanks

 

[groundscr8pr]

if the amp is powering a sub just tap the sub wires in the rear pillar. much easier! if you need a diagram for you truck go here http://www.crutchfield.com/support/faq.html then enter y/m/m

 

[jksb1982]

well my line out converter is asking for a left and right side hook up and as far as i have been told the uq3 stereo is supposedly a premium stereo but not bose and i do have onstar. I have already ran the rca's to the dash and hidden all the wires

---------- Post added at 04:44 PM ---------- Previous post was at 04:41 PM ----------

I figure somebody would have had to seen this before and had a diagram for the layout of the wires the converter i bought also has a remote turn on and i have also already ran it to the dash and hidden the wire thats why im hoping to keep the converter in the dash

 

[groundscr8pr]

if you follow the link posted above it will give you a pin layout at the radio plug and the amp..

 

[jksb1982]

ok found the pin layout only one more thing the layout from the cd player to the amp only has one negative for front speakers and one negative for rear speakers but positives for both front and rear should i just tap into both front positives with each wire included and tap both my negatives into that one front negative ?

 

[chip]

"y/m/m" returns no results for me

 

[groundscr8pr]

"y/m/m" returns no results for me

year/make/model

 

[chip]

I am rolling around laughing at myself in my head right now!

 

[groundscr8pr]

haha... it happens