Trying to find running board mounting clips

[LittlePearl13]

Hi guys. So I found a set of factory running boards from a local dude (who turned out to be a one of the guys from my buddy's construction company) for $80. When we checked them out I noticed I would not be able to mount them because I am missing these clips (see pic). He said he'd come down on the price for the difference, so I figure, why the hell not? $40 running boards... I'm in. Only, I can't find these anywhere, and none of the dealerships are calling me back. Any ideas?

 

[SunlitComet]

http://www.compnine.com/index.php?u...delid=7108&capuid=1&majorgroup=16&grouptype=B

Who's the Tahoe Genius?

 

[LittlePearl13]

Oh man, you are. However I do have a question: if you look closely at the pick, there's definitely 3 or 4 of the clips per side, this shows 2. How many of each should I get? Or just one type? I didn't notice number 22, just 21 when I was under there.

 

[SunlitComet]

There are five on each side. But check the application on top of page. I have posted the 1995 link but it calls up the 1996 page for me unless I pick the application manually again after which re-posting still brings up '96 units. Not sure why but some part numbers are different and on the 95 it might use two different ones or one all the same. Not sure why I am suddenly having issues with the site.

There are five brackets for each side thou. Look closely at the rocker panel.

---------- Post added at 03:28 PM ---------- Previous post was at 03:26 PM ----------

Also re-did link again for the '95 it works now.

 

[LittlePearl13]

Thanks a bunch!

Much as Charlie Sheen is a violent torpedo of truth, Jonathan is an all-knowing, sunlit comet on a collision-course towards your brains, bringing with it a link for and tips for anything you could ever need. SunlitComet is the Tahoe-Guru. Or, Taguru, if you will.

Feel free to sig quote.

 

[SunlitComet]

Thanks a bunch!



Feel free to sig quote.

If did I could not brag about all the stuff I have. But thanks.