Tucking wheels

[Negligence]

If you check on the street suspension forums I'm in the process of doing an airbag setup in my Tahoe. I currently have 24x10 Zinik Mazotti wheels. I'm not exactly sure of the offset but I believe it is posted on the inside of the rim? Just wondering what the offset of the wheel you guys are running and gettin them to tuck. I was told by my fab guy that the front wheels will camber in a little on the top and get them to tuck in but I just feel like the rims I have still stick out too far. If thats the case they will be up for sale and I'll probably downside to 22s with the right offset I need. Thanks for some info in advance.

 

[TEXAS DEMON]

by looking at the picture they seem to stick out a bit too much for bags. you will be better off getting the right offset and save some money and cutting on the bag setup.

 

[NASTY GM]

If you want to tuck all 4 wheels your looking at a lot of fab work Just wheels are not going to do it.

 

[Negligence]

by looking at the picture they seem to stick out a bit too much for bags. you will be better off getting the right offset and save some money and cutting on the bag setup.

What type of bag setup are you running? Any other mods done to get the truck to sit how yours is? And wheel offset, what should I look for? Also, 24's are up for sale, i cant post them in the for sale section yet because of my post count.

 

[Negligence]

ttt, wheels are on ebay, will discount members of this forum.
item 170523116703

 

[TEXAS DEMON]

well in the front it has upper cups and tubular lower control arms. the rear has the djm rear kit and it also has the free travel mod and bag over axel. that was then now oit has cut up to lay out on billet 6s.