Turn Signal LED swap fast clicking.

[Tom Joad]

Hi all,

I've swapped my front (and fornt only) bulbs for LED bulbs. Hazard signal works perfectly fine but turn signal are way too fast...

I've removed the flasher located under the steering column.
My part is GM 15764135 2/4-w/opt. trailering

I've read on another forum that 2/4 means 2 turn signals, 4 hazards.

Does opt. trailering means it works occasionally with a trailer (or a bike mount as I do) ?

Then why the 3/6 flasher is for ?

Anyway, will this flasher work with my led bulbs : ACDELCO 10383321 ?

 

[kwOH]

Hi all,

I've swapped my front (and fornt only) bulbs for LED bulbs. Hazard signal works perfectly fine but turn signal are way too fast...

I've removed the flasher located under the steering column.
My part is GM 15764135 2/4-w/opt. trailering

I've read on another forum that 2/4 means 2 turn signals, 4 hazards.

Does opt. trailering means it works occasionally with a trailer (or a bike mount as I do) ?

Then why the 3/6 flasher is for ?

Anyway, will this flasher work with my led bulbs : ACDELCO 10383321 ?

Not sure about flashers and what not, when i did my turn signals in the front i wired in 2 resistors on each signal light.


Sent from my iPhone using Tapatalk

 

[Tom Joad]

HI, I found out that a electronic relay exists. I've ordreerd it though Rockauto and will keep you informed.

 

[OhFourChevy]

Flasher relay is what I did, I don't mess with resistors, I replaced all my lights with led, well headlights are HID...

 

[Tonyrodz]

HI, I found out that a electronic relay exists. I've ordreerd it though Rockauto and will keep you informed.

That supposed to slow it down?

 

[Tom Joad]

That supposed to slow it down?

Yes. Instead of being lead by the power consumption as regular relays does, this one should be fully electronic, so the blinking is set from factory.
I'll tell you more and post pics when it's at home.