Upgrades to the OEM Yukon 21+ headlights

[Vladimir2306]

Does not appear to be available yet.

While not cheap, it appears it will include to the 4 Rigid light assemblies that are not cheap. I expect the 4 Rigid lights to be about $530 of the price if this option. Plus t I he price of the Plug and Play wiring harness. I hope the wiring takes into consideration the current requirement and if a relay and direct power connection is required this is part of the package.

2021-2024 GMC YUKON FOG LIGHT KIT

This is a preorder they should ship nov1st-nov7th 2021-2024 gmc yukon all models with oem fog lights (pods in the pic will not be used we will be using the srm flood and sae pods) Rigid industries -12G Stainless steel / powder coated Brackets -1 pair Rigid SR-M FLOOD -1 pair Rigid SR-M SAE...

www.midsouthled.net

What an interesting thing))) the combination of high beam and wide beam should give excellent light. But, unfortunately, in the Yukon, either the fog lights work or the high beams work. They cannot be turned on together.

 

[jfoj]

What an interesting thing))) the combination of high beam and wide beam should give excellent light. But, unfortunately, in the Yukon, either the fog lights work or the high beams work. They cannot be turned on together.

Ah, but this is with the stock wiring configuration, a little creativity with a few relays and this can be easily solved!! Typically fog lights are not configured to work with high beams because in fog, high beams reflect back in the drivers eyes.

Kind of like by 2005 Yukon Denali where the low beams went out when the high beams were enabled, unless you held the "Flash To Pass", I quickly resolved this problem and dealt with the additional Voltage drop to standard or Xenon bulbs with relays and a direct connection from the battery rather than the 18 gauge wiring that was powering the headlights.

 

[SavageDad]

So I made my own custom harness to plug into the factory harness for the fog lights. I had factory cross members that I attached my light brackets to and the results were great.
View attachment 448591
View attachment 448592

I was looking at doing something semi similar, but the Z71 front end doesn't leave any room to add a bracket.

 

[Bigburb3500]

I was looking at doing something semi similar, but the Z71 front end doesn't leave any room to add a bracket.

Really? On a the newer 21+ or older models? The brackets I have are maybe 5” deep including the lights. The bigger pain is just removing the front bumper and if it’s newer with the active-areo… then maybe but a few guys on here I’ve seen mount lights near the corner of the hood (like Jeeps). Always an option!