jrhunkler
Member
Has anyone here ever successfully upgraded the manual-knob type AC Control unit (LS) to the digital (LTZ) control unit? Any information would be greatly appreciated. Thanks!
Upgrading HVAC Control to LTZ from LS (2011 Tahoe)
- Thread starter jrhunkler
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
CEN2MENTAL95
Banned
wrong section
OP
OP
jrhunkler
Member
domin8
Just Plinking
- Joined
- May 9, 2011
- Posts
- 6,038
- Reaction score
- 10
I've been told it can't be completely done. The digital display utilizes various temperature sensors located throughout the vehicle. The electrical work to get it all done is a monster of a project, and very expensive.
OP
OP
jrhunkler
Member
I've been told the same thing, but I don't believe it. Anything can be done. Directly swapping it allows the air to come on and off, I just wouldn't utilize the "auto" feature. A/C won't work without some different configuration in the wiring... just looking for details on what to do...
OP
OP
jrhunkler
Member
Has anyone here ever successfully upgraded the manual-knob type AC Control unit (LS) to the digital (LTZ) control unit? Any information would be greatly appreciated. Thanks!
Merged and moved thread to correct area.
No it can't be done easily. You need a new complete wiring harness, new ECM, aspirator fan, etc...
It's cheaper to get a new truck.
No it can't be done easily. You need a new complete wiring harness, new ECM, aspirator fan, etc...
It's cheaper to get a new truck.
Yep, cant be done (cheaply). People have already researched it on NBS and NNBS Silverados, like NathanJax said, need a new dash/body harness, fan/auto temp sensor(add hole to headliner) and hvac controls. Someone on gmfs has done it on a NBS and it wasnt cheap.
hillstrubl
Member
- Joined
- May 11, 2024
- Posts
- 58
- Reaction score
- 48
...what about the opposite?
mikez71
Full Access Member
- Joined
- Mar 9, 2023
- Posts
- 1,369
- Reaction score
- 1,606
I've done the opposite here...
www.tahoeyukonforum.com
HOW TO: Convert CJ2 automatic -> CJ3 manual climate controls
1. Remove radio trim. (plastic prybar) 2. Remove switchbank under hvac controls (7mm socket) 3. Remove HVAC module. (7mm socket) 4. Re-pin/de-pin ~11 wires shown below (pin removal tool or fine pick) 5. Splice illumination wire (YE) from J1-4 switchbank plug to J2-1 HVAC module. (2' of wire and...
www.tahoeyukonforum.com
Last edited:
