Want to start a 6.0 ** project...

[Matahoe]

Can someone point me in the right direction to find an 6.0 or 6.2 ** block? I test drove a 6.2 Maxx one time and loved the throttle response and torque. Can these be retrofitterd into a NBS engine bay? I'm assuming there are no factory compatible PCM's...could be wrong. Just looking for a stock engine rebuild candidate.

How rare are they and what vehicles do I need to search for? Im guessing most 6.2 **'s were standard in 07-14 Chevy 2500 HD's and Caddies. Any threads you could inform me about? Thanks!

 

[Da90]

If it’s going in a NBS find a LQ9.

http://bdturnkeyengines.com/60l-lq9-vs-lq4


Sent from my iPhone using Tapatalk Pro

 

[zraffz]

The crankshaft reflector wheel is the reason a newer 6.2 won't work with your NBS. I would find an LQ9, as stated above and get a set of 6.2 rectangular port heads and intake manifold. You might need to have the pistons fly cut to clear the bigger valves.

I don't know what the difference in the cam is.

 

[Bombsquad85]

Or just get an lq4 or lq9 and have it bored out to a 6.7