What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

K2 Kaiju

Full Access Member
Joined
Feb 17, 2015
Posts
704
Reaction score
749
Location
The Depths
I **** after your setup every time I see it. Not a lot of luck finding a jumper to match Shale interior unfortunately!
Thanks! Dont let color set you back. LVP is a pretty easy way to change color. I used it to repair my worn Avalanche driver seat, and on my kids first car (2007 accord beater). Pretty durable stuff, and you just spray it in layers...ff1dec095ccf13ae7ffc9ac255583d15.jpg3933dc702a21a708b6bac3deba215174.jpg90d8c0cd6018afdbb1e28605b0e6eb69.jpg73cef97e8b1647dd49698b9576c00c78.jpg237fcf48b68c017e19b6d3a4979ff751.jpg

Sent from my SM-G975U using Tapatalk
 
Joined
Oct 2, 2020
Posts
84
Reaction score
78
Wow, I hadn't even thought of that. My first thought was Katskinz, but not sure they make the right color either, and then I thought to just buy whatever color was available and have an upholsterer match the leather and stitch patterns. Seems like that option would be $$$$$ though. We'll see, it's something that's been on my mind for a while.

Would just trade captains for a 60/40 bench, but again, hard to come by in shale, and $$$$$ if you can find em. C'est la vie, no?
 

tsuintx

Full Access Member
Joined
Oct 21, 2014
Posts
518
Reaction score
453
Location
DFW
Finally, after about six months after gathering all parts, I got around to doing tow hook and fog light retrofit.

Also added anti-flickers for the headlights since the Morimoto 2stroke 3.0s just wouldn’t work properly. Passenger side was out most of the time and they kept flickering. So, hopefully this is it.

The retrofit wasn’t too bad, actually. I read one of the threads here to see how things go, but of course I had to do a few things twice since I didn’t think while working. The gen5diy harness made things simple on the wiring side. Just plug and play.

1D48B7F8-7EC7-48C1-A2DB-74591D34F64D.jpeg FB1AB6BD-D651-4490-9932-E3DA90D91794.jpeg BC93D88D-5FB5-4577-905A-13C0AB0C951D.jpeg
 

Jeff_

Full Access Member
Joined
Jan 9, 2021
Posts
296
Reaction score
367
Location
Scottsdale, AZ & N. Idaho
Finally, after about six months after gathering all parts, I got around to doing tow hook and fog light retrofit.

Also added anti-flickers for the headlights since the Morimoto 2stroke 3.0s just wouldn’t work properly. Passenger side was out most of the time and they kept flickering. So, hopefully this is it.

The retrofit wasn’t too bad, actually. I read one of the threads here to see how things go, but of course I had to do a few things twice since I didn’t think while working. The gen5diy harness made things simple on the wiring side. Just plug and play.

View attachment 281121 View attachment 281122 View attachment 281124
Nice job. Did you replace the light dial in the cab with the factory fog lamp one for an OEM look and function?
 

tsuintx

Full Access Member
Joined
Oct 21, 2014
Posts
518
Reaction score
453
Location
DFW
Nice job. Did you replace the light dial in the cab with the factory fog lamp one for an OEM look and function?

No. The fogs are always on with headlights. Not necessarily the way I like it, but it was much easier. Might look into an actual factory style conversion at some point. It’s just a bit more involved than what I’d prefer. We’ll see…
 

Jeff_

Full Access Member
Joined
Jan 9, 2021
Posts
296
Reaction score
367
Location
Scottsdale, AZ & N. Idaho
No. The fogs are always on with headlights. Not necessarily the way I like it, but it was much easier. Might look into an actual factory style conversion at some point. It’s just a bit more involved than what I’d prefer. We’ll see…
Ah I see. Makes sense when you put it that way. I think I’m going to eventually try to tackle a full factory style conversion for dogs at some point but I’d need a step by step from someone who’s done it and a lot of patience.
 

tsuintx

Full Access Member
Joined
Oct 21, 2014
Posts
518
Reaction score
453
Location
DFW
Ah I see. Makes sense when you put it that way. I think I’m going to eventually try to tackle a full factory style conversion for dogs at some point but I’d need a step by step from someone who’s done it and a lot of patience.

There is a step-by-step somewhere here on the board. Just not something I'm necessarily comfortable with doing as it requires some wiring stuff and I don't want to mess anything up. It shouldn't be too bad, but me and wiring stuff doesn't necessarily always go together, so I'll leave it as it is for now and maybe look into it later.

At least I have the fogs in there now and it will only matter of wiring if/when I get to it.
 

CMoore711

Full Access Member
Joined
Jul 18, 2017
Posts
1,286
Reaction score
1,101
So I finished the chrome delete on my '15 Yukon XL Denali that is OEM Quick Silver Metallic this past weekend. The only items I had left to take care of was the chrome trim on the roof rails, chrome trim on the power retractable side steps, and the chrome on the door handles.

I went with gloss black on the roof rails and side steps. But I decided to color match the door handles to my OEM Quick Silver Metallic Paint. To do so I went with 3M 1080-G120 Gloss White Aluminum. I gotta say, for being vinyl and not paint I am beyond impressed with how well this vinyl matches the OEM Quick Silver Metallic Paint.

I know door handles are small, round, with a few tight rounded edges; So I had a level of expectation that there could be some minor wrinkles in the wrap near the end edges of the handles and there are some very tiny ones if you look close, but overall very impressed with how they turned out.

No full vehicle pics yet as my truck desperately needs a wash, detail, and I have one final exterior mod to go to finish the exterior.

My rig has 113K miles on it, and my door handles aren't perfect, but wanted to post some detailed pics to show you guys how well it matches.

Pics in the shade:
yTfZfVV.jpg
L7LiepA.jpg

Pics in direct sunlight:
ZOhIFTx.jpg
X14KcHY.jpg
7eEhRsP.jpg
 

STORMIN08

Full Access Member
Joined
Nov 21, 2011
Posts
974
Reaction score
460
Motofab 2.5f / 1.5r
Bilstein 5100 in rear
Powerstop Z36 brake package F/R
Toyo 285/50/22

I don't generally park like that, but the ball fields this day had a huge turnout and trucks were asked to assist like this
 

Attachments

  • 20210605_160449.jpg
    20210605_160449.jpg
    509.5 KB · Views: 16
  • 20210607_175856.jpg
    20210607_175856.jpg
    538.5 KB · Views: 14
Top