What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[wendal]

the original seller messaged me back they said they could sell me a regulator for $19.99 or replace the alt with a new one for $119, I think I have to send the core back but i'm going to just get a new one from them then

Thanks for the info. I'll just be prepared to buy another one when my inevitable time comes LOL. Still less than $400...

 

[93blkongreenpro]

Left my cooler in the back from the weekend, and low and behold, I get home to this yesterday. I couldn't figure out where the water was coming from, then it hit me. And the carpet is all just slightly wet from the continuous drip of melting ice. I hope it dries out fine.

Big dummy me.

Luckily, it seems all the electronics and amps are dry.

Sent from my SM-N950U using Tapatalk

 

[R3cord303]

Left my cooler in the back from the weekend, and low and behold, I get home to this yesterday. I couldn't figure out where the water was coming from, then it hit me. And the carpet is all just slightly wet from the continuous drip of melting ice. I hope it dries out fine.

Big dummy me.

Luckily, it seems all the electronics and amps are dry

Sent from my SM-N950U using Tapatalk

Wet carpet is my least favorite thing to deal with in cars. When I had leaking windows in my S10 I had pulled the carpet and put it in the spare bedroom with the heat on as high as it would go, and then a dehumidifier running all the time. Crazy how much water the dehumidifier sucked out of that thing

 

[gooffeyguy]

Rear cargo liner (Husky/WeathsrTech) would've prevented this... Lol

Actually, a non-broken cooler would've prevented this.... Throw that shit out and get a new one.... Lol

Is it parked on a hill? How'd it get all the way to the front?

2001 Yukon SLT
2012 Yukon Denali XL
2011 Yukon Denali RIP 5/20/18

 

[PG01]

Drove it this weekend, yes i miss dd-ing it but its for the better, poor baby was getting tore up..

 

[93blkongreenpro]

Wet carpet is my least favorite thing to deal with in cars. When I had leaking windows in my S10 I had pulled the carpet and put it in the spare bedroom with the heat on as high as it would go, and then a dehumidifier running all the time. Crazy how much water the dehumidifier sucked out of that thing

Hopefully it dries out. Its mid 80s here in nc and I left the fronts cracked for some air ventilation, so hopefully that helps.

Rear cargo liner (Husky/WeathsrTech) would've prevented this... Lol

Actually, a non-broken cooler would've prevented this.... Throw that shit out and get a new one.... Lol

Is it parked on a hill? How'd it get all the way to the front?

2001 Yukon SLT
2012 Yukon Denali XL
2011 Yukon Denali RIP 5/20/18

I do have weather techs for the entire truck, but I have the rear cut out for the 3rd row seats, so the water still made it out.

And yes, my driveway is angled and that's how it made it to the front.

Sent from my SM-N950U using Tapatalk

 

[R3cord303]

Hopefully it dries out. Its mid 80s here in nc and I left the fronts cracked for some air ventilation, so hopefully that helps. I do have weather techs for the entire truck, but I have the rear cut out for the 3rd row seats, so the water still made it out.

And yes, my driveway is angled and that's how it made it to the front.

Sent from my SM-N950U using Tapatalk

gas is cheap. Could run heater and defrost on as high as itll go front and rear and leave windows cracked. Evaporate all the moosture and defrost sucks it out

 

[93blkongreenpro]

gas is cheap. Could run heater and defrost on as high as itll go front and rear and leave windows cracked. Evaporate all the moosture and defrost sucks it out

Good idea. I will have to give that a whirl when I get home

Sent from my SM-N950U using Tapatalk

 

[R3cord303]

Good idea. I will have to give that a whirl when I get home

Sent from my SM-N950U using Tapatalk

I did that in my S10 after i left the windows down and it rained (about a year after the leaks were fixed)

 

[Malik112099]

You could try the Frostfighter.

I thought about that but if there is not metal to solder to then there is nothing to make the electrical connection and produce heat...unless I'm missing something here with this stuff