What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[DaRosa218]

Fresh oil change, cleaned air filter and checked all fluids

 

[Doubeleive]

Fresh oil change, cleaned air filter and checked all fluids

hear that @CHOO CHOO

 

[gooffeyguy]

Changed the spark plugs and wires.

It was harder to get the spark plug cables off then it was to remove and install the plugs.

Hope I torqued them to the correct spec, 11 ft lbs if I remember correctly

2001 Yukon SLT
2012 Yukon Denali XL
2011 Yukon Denali RIP 5/20/18

 

[Doubeleive]

Changed the spark plugs and wires.

It was harder to get the spark plug cables off then it was to remove and install the plugs.

Hope I torqued them to the correct spec, 11 ft lbs if I remember correctly

2001 Yukon SLT
2012 Yukon Denali XL
2011 Yukon Denali RIP 5/20/18

 

[gooffeyguy]

Sweet, I remembered correctly!

Did them all from the top. Driver's side super easy, passenger side not so much due to having to work around all the AC/Heater hoses and dipstick.

Like I said above, took longer to pull the wire off the plug then it did to remove/install the plug...lol
I used to have plug wire boot pullers that looked like a pair of pliers with rubber coated right angle ends, but I couldn't find them so just did them all by hand.

 

[R3cord303]

Used the tahoe to get another load of belongings from the old place to the new. Raining decently here. Turned off stabilitrack and slid around a corner little bit. Its amazing how differently it behaves with the nanny turned off.

New tires are ordered and will be installed this week as well!

 

[swathdiver]

Put a new gas cap on ours, hoping that maybe that pesky P0442 will go away without robbing the wallet.

 

[Burb!!]

My key was starting to look like trash and I got a Chevy blank from Amazon; home depot cut a copy for me for free and I programmed the new transponder chip key to the truck. Spent about $15 in total.

Sent from my SM-N960U using Tapatalk

 

[R3cord303]

My key was starting to look like trash and I got a Chevy blank from Amazon; home depot cut a copy for me for free and I programmed the new transponder chip key to the truck. Spent about $15 in total.

Sent from my SM-N960U using Tapatalk

Whats the part number for the 2015+ fob?

 

[PG01]

My key was starting to look like trash and I got a Chevy blank from Amazon; home depot cut a copy for me for free and I programmed the new transponder chip key to the truck. Spent about $15 in total.

Sent from my SM-N960U using Tapatalk

Throw up a pic of that big ol bish...i miss seeing it