What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[Doubeleive]

Front diff looks great per the magnet anyway

 

[Doubeleive]

Did one of my semi annual engine pressure washing, came out pretty clean, other than the water stains which cleans off

 

[Doubeleive]

And then a little spit polish (With GUNK Stage 2)

 

[Sir_Hiro]

Junkyard run was a success.
Got a upper denali grille for 30 bucks. Lower was destroyed.
A new rear window switch to replace broken. All in all a good day.

Headlights are next on the list to buy. Found the mounting tab on the passenger side is busted plus they are way to sunbaked to recover

 

[RooTBeeRthe1st]

Got to work about 45 minutes early so parked and idled with the heater on and took a little nap.



Got out and realized there was a decent little puddle under the front end so my Cold Case radiator must be leaking worse than it used to.



So just ordered another one and it'll probably be here tomorrow or Wednesday at the latest.



Swap them out hopefully I don't need to buy a new fan shroud since I had to modify the old one.



See how bad it is and either clean and braze it myself or just drop it at a radiator shop and have them weld it back shut.

 

[Doubeleive]

Dorman steering wheel cover set arrived, smidge darker but will work and probably won't tell much difference from the rest once installed

 

[bobsburban]

Baby got new shoes - Falken A/T4W Wildpeaks in 285-70-17.



...and brake calipers, brake shoes, Brembo brake rotors, and front hubs. Found out some 285/70-17s are more 285/70-17 than others. These are in the more category - a full 33" in diameter and even with the PO's ride height adjustment I had to cut some inner fender to clear them.

 

[Geotrash]

Got to work about 45 minutes early so parked and idled with the heater on and took a little nap.



Got out and realized there was a decent little puddle under the front end so my Cold Case radiator must be leaking worse than it used to.



So just ordered another one and it'll probably be here tomorrow or Wednesday at the latest.



Swap them out hopefully I don't need to buy a new fan shroud since I had to modify the old one.



See how bad it is and either clean and braze it myself or just drop it at a radiator shop and have them weld it back shut.

I'm pretty sure those things are brazed with gouda cheese at the factory. I replaced my leaky 2.5-year-old Cold Case with a Denso and haven't looked back.

 

[Tonyrodz]

I'm pretty sure those things are brazed with gouda cheese at the factory. I replaced my leaky 2.5-year-old Cold Case with a Denso and haven't looked back.

Seems like a lot of guys have had issues with those Cold Case radiators. I definitely wouldn't buy one.

 

[Sir_Hiro]

Spent the better part of 45 mins trying to bring back the chrome on a wheel. Its gonna be a process..but i think turned out great