What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[07Burb]

i didnt really pay attention to it. is that a cause for concern? this was the first time i was doing any mechanical work ever, on a car.

You've never done mechanical work on a car and a valve cover gasket is what you used to be your first experience? I'm impressed!! Most would be intimidated by that

 

[farhanm]

You've never done mechanical work on a car and a valve cover gasket is what you used to be your first experience? I'm impressed!! Most would be intimidated by that

Thanks... i spent quite some time going through videos before i attempted. Special Thanks to Kysrsze for This

---------- Post added at 09:44 PM ---------- Previous post was at 09:41 PM ----------

It's common on these trucks. Krp makes a bracket that I used that works great. Get in there and take a look. It ultimately means you have a exhaust leak.

btw from the pictures can you pin point/indicate the bolt you suspect could be broken off one?

Thanks
--
Farhan

 

[Goodinblack]

Vote for August 2015 Truck of the Month.

http://tahoeyukonforum.com/forum/showthread.php?t=74372

 

[bigrhino]

Removed the black tab on the rear window.

 

[devious1]

Removed the black tab on the rear window.

how did that work out? i've been meaning to do it, but i've read that its a pita

 

[06yukon619]

Finally got my torsion keys and Bilstein shocks installed.

 

[bigrhino]

how did that work out? i've been meaning to do it, but i've read that its a pita

Wasn't to bad. Took some fishing line,went behind the tab and slowly went back and forth until it came off. Used Goo Gone and a razor to get the rest of the glue off.

 

[devious1]

Wasn't to bad. Took some fishing line,went behind the tab and slowly went back and forth until it came off. Used Goo Gone and a razor to get the rest of the glue off.

@bigrhino - that doesn't sound bad at all. i thought i would have to put a heat gun to it for quite some time and basically pry it off. thanks for the reply, looks like i might be tackling this later today.

 

[d-alex-l]

Wasn't to bad. Took some fishing line,went behind the tab and slowly went back and forth until it came off. Used Goo Gone and a razor to get the rest of the glue off.

@bigrhino - that doesn't sound bad at all. i thought i would have to put a heat gun to it for quite some time and basically pry it off. thanks for the reply, looks like i might be tackling this later today.

No pun intended huh?

---------- Post added at 02:09 PM ---------- Previous post was at 02:09 PM ----------

Changed out the door speakers and upgraded to the Kickers. Massive difference in the highs and lows.

 

[devious1]

No pun intended huh?

---------- Post added at 02:09 PM ---------- Previous post was at 02:09 PM ----------

Changed out the door speakers and upgraded to the Kickers. Massive difference in the highs and lows.

are you running a oem or aftermarket HU? i need some advice on a mild upgrade from the bose system