What part number is this nut under silplate

[ramchol76]

Hi All

Need help with identifying the part # of the nut fitting the bolt (circled in picture) which holds the wiring under sil plate, any alternative nut spec if known is fine as well.

thanks

 

[915_Tahoe]

Hi All

Need help with identifying the part # of the nut fitting the bolt (circled in picture) which holds the wiring under sil plate, any alternative nut spec if known is fine as well.

thanks

View attachment 262230

GM#21011332 $5.98

 

[ramchol76]

21011332

Many Thanks!!!

 

[Rocket Man]

Hi All

Need help with identifying the part # of the nut fitting the bolt (circled in picture) which holds the wiring under sil plate, any alternative nut spec if known is fine as well.

thanks

View attachment 262230

Take one off the other side, go to your local hardware store, and match it up. 20 cents vs 6.00.

 

[wjburken]

Take one off the other side, go to your local hardware store, and match it up. 20 cents vs 6.00.

The nut is a M5-.8 flange nut.

 

[gooffeyguy]

Damn, $6 for that stamped sheet metal nut!

Sent from my SM-G930V using Tapatalk

 

[wjburken]

Damn, $6 for that stamped sheet metal nut!

Sent from my SM-G930V using Tapatalk

Yeah - can get 100 for about $12.00.

https://www.fastener.zone/products/auveco-12254-807-gm-21011332

 

[Rocket Man]

Yeah - can get 100 for about $12.00.

https://www.fastener.zone/products/auveco-12254-807-gm-21011332

Yeah but those are aftermarket.

 

[gooffeyguy]

I have a few black ones sitting on my work bench I've had for years that came with some mud flaps (I think) I got years ago.

I also just took down and gutted all my fluorescent light fixtures in my garage and replaced with LED strips. Each ballast in each fixture was secured with 1 or 2 of these, depending on the fixture style.

I think they're the same size

This is only half of them....

Sent from my SM-G930V using Tapatalk