where are wires for Electric Brake controller for trailer on NNBS?

[04ctd]

I thought there was a thread on here somewhere, but cant find it now.

Looks like my Tahoe will end up towing a little trailer for some family trips.

 

[TowGMC]

Some of the best towing installation videos are found at etrailer.com. They install everything they sell and have put a boatload of videos up on their website.

Assuming your Tahoe has the factory towing package with the factory Class III receiver and 7-way plug, the wires for the brake controller is taped up under the dash. On my Denali and two friends' Tahoes the harness was taped near the fuse panel to the left of the steering column.

Try this etrailer video link for a really good look at what you need to do, they uses a 2011 Tahoe:
https://www.etrailer.com/Brake-Controller/Chevrolet/Tahoe/2010/90195.html?vehicleid=2010106233

And I've used nothing but the Tekonsha Prodigy for years in my last 3 tow vehicles and they're the best. My current unit is a Prodigy 2.

 

[04ctd]

video by itself:
https://images.etrailer.com/Merchan...ke-controller-2011-chevrolet-tahoe-90195.webm

video on the website:
https://www.etrailer.com/tv-install-brake-controller-2011-chevrolet-tahoe-90195.aspx

thanks for the link, i would not have known about the under hood power.
but that makes sense, because none of my lights in the trailer work
the underhood connections are at time 3:50


yes, I have Tekonsha P3.

 

[TowGMC]

Thanks for directly posting the links, I was on the iphone trying to reply.
The under hood power is a piece of cake too. GM did make it pretty darn easy for us on this one. Don't forget the 20A circuit breaker to mount inline in the engine compartment too.