zieglerj-pdm-specialist
Full Access Member
I just keep buying items for my Yukon Xl Denali that I haven't installed yet and once it warms up I have a lot of work to do.
I just keep buying stuff that will take me a week to install.
1) I have a Pivot Push Button Start Button.
2) Hi beam and Low Beam 12,000 HID bulbs for the front Hi and low beams
3) Also a Stereo adapter for my steering wheel which is an easy install because I put one on my Wife's Bonneville GXP
4) Tint for my front windows that are legal because I used to have limo tint and the cops didn't like it. So I got the legal tint.
5) Moon roof Visor that almost came off on the highway because it never fit flat on the roof so I will take a heat gun at it and flatten it out so it fits perfect.
6) Chrome palettes in between the driver window and the rear passenger windshield so it has chrome in between the two.
7) I have a Alpine rearview camera I need to install.
8) A grounding unit to eliminate an leaks, you wire it up to the Negative and the positive and if it has a leak it takes the leaking voltage and takes it back to the positive
on the battery.
9) I need to hot wire a 60 inch rear tail light with Stop light turn left and right turn signals. So it uses no part of my rear plug in, so its all soldered to the write wire.
10) I need to mother's scrub my 23 " rims then mount a 1 inch Spacers on the rotors to make my Denali have a more aggressive stance.
11) I also need to install a carbon fiber dash and make carbon fiber wheel well accents.
12) Also a Viper install light since I have viper alarm and auto start. 2 Indiglo viper patches. plus LED Blue lights lining the inside of the Yukon Denali under dash and on
the Floor giving it a Blue Glow all around under the insides of the Yukon/
13) I have a 6 switches for what lights to turn on or not plus Im going to install a speaker and amplifier connecting the to the lights also if I want to have them on or not.
So I have a lot to do and a lot of hoping they work when I install
I just keep buying stuff that will take me a week to install.
1) I have a Pivot Push Button Start Button.
2) Hi beam and Low Beam 12,000 HID bulbs for the front Hi and low beams
3) Also a Stereo adapter for my steering wheel which is an easy install because I put one on my Wife's Bonneville GXP
4) Tint for my front windows that are legal because I used to have limo tint and the cops didn't like it. So I got the legal tint.
5) Moon roof Visor that almost came off on the highway because it never fit flat on the roof so I will take a heat gun at it and flatten it out so it fits perfect.
6) Chrome palettes in between the driver window and the rear passenger windshield so it has chrome in between the two.
7) I have a Alpine rearview camera I need to install.
8) A grounding unit to eliminate an leaks, you wire it up to the Negative and the positive and if it has a leak it takes the leaking voltage and takes it back to the positive
on the battery.
9) I need to hot wire a 60 inch rear tail light with Stop light turn left and right turn signals. So it uses no part of my rear plug in, so its all soldered to the write wire.
10) I need to mother's scrub my 23 " rims then mount a 1 inch Spacers on the rotors to make my Denali have a more aggressive stance.
11) I also need to install a carbon fiber dash and make carbon fiber wheel well accents.
12) Also a Viper install light since I have viper alarm and auto start. 2 Indiglo viper patches. plus LED Blue lights lining the inside of the Yukon Denali under dash and on
the Floor giving it a Blue Glow all around under the insides of the Yukon/
13) I have a 6 switches for what lights to turn on or not plus Im going to install a speaker and amplifier connecting the to the lights also if I want to have them on or not.
So I have a lot to do and a lot of hoping they work when I install
Last edited: