Ryan Buck
Full Access Member
If you run a brembo big brake kit, have you had to replace the pads or rotors yet? If so what did you use and where did you get it from?
Who's running Brembo brakes?
- Thread starter Ryan Buck
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
Ryan Buck
Full Access Member
Crickets churping
R3cord303
Posse In Effect
You’ll probably have to get the part numbers for pads and rotors and cross refrence them to see what fits. I know some people that have big brake kits on their cars- I think Miatas mainly that take a pad that is a porsche part.
Thats something I’ve never liked about big brake kits. Way harder to walk into a parts store and get parts.
I think for NBS stuff you can put NNBS brakes on them.
asand
Full Access Member
- Joined
- Aug 9, 2018
- Posts
- 154
- Reaction score
- 172
This. I just put '09 front brakes on mine with ceramic pads and they're awesome. 1" bigger rotor with larger pistons.
Staggered 02
Full Access Member
- Joined
- Jul 5, 2019
- Posts
- 657
- Reaction score
- 1,493
No Brembos but I am running Wilwood brakes. I ordered replacement brake pads from Summit Racing which. The brake pads do seem to last longer than stock pads. I am very happy with this mod.
OP
OP
Ryan Buck
Full Access Member
I picked up a set of pads for a newer hellcat which runs 6 piston brembos. The metal backing is a little bit bigger towards the center so idk if it will hit or not but i can trim it if i need to. The rest looks the same other than the friction part. They’re only like three eights thick And the brembo gt pads are almost double
