Will 37's fit

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

custom99

Member
Joined
Feb 16, 2011
Posts
57
Reaction score
1
Location
Pittsburgh, Pa
I just finished installing a 6 inch suspension lift on my 2001 Yukon XL 2500. Anyone know if 37x12.5-18 will fit. I found a set on Craiglist and its a bit of a drive. Worth the drive if I know they will fit. The rims were being used on a H2 Hummer previously.
 

jdpber

GOLD MEMBER
Supporting Member
Joined
Oct 18, 2010
Posts
26,505
Reaction score
25,304
Location
The America
No they will not. Not without more lift.

I have a 6" and 35s.
I mean yes 37s will fit but you will not be able to turn the wheels so it would be useless.

ImageUploadedByTapatalk 21360445224.237633.jpg

For you to clean 37s and turn. You would need to add a 3" body lift
 

jdpber

GOLD MEMBER
Supporting Member
Joined
Oct 18, 2010
Posts
26,505
Reaction score
25,304
Location
The America
Wheel wells limit us

Exactly why I am such a huge supporter of GM to get away from the square well and go to a round well. Take the wells on the 250+ body's they can clear 35s with a 2" level kit. Yet I need 6" suspension and some trimming depending on offset.
 

Donnie Yukonie

Yates Caretaker
Supporting Member
Joined
Jul 31, 2011
Posts
5,125
Reaction score
161
Exactly why I am such a huge supporter of GM to get away from the square well and go to a round well. Take the wells on the 250+ body's they can clear 35s with a 2" level kit. Yet I need 6" suspension and some trimming depending on offset.

Agreed , however I do like the Looks of a square well a little better
 

Max

Mile High
Joined
May 3, 2009
Posts
3,570
Reaction score
33
Location
Denver
They'll fit depending on wheel and offset. The 2500 trucks sit a tad higher lifted, which kit are you running? I've done 37s on a few 2500s.
 

McAllister513

Member
Joined
Sep 19, 2009
Posts
54
Reaction score
1
I fit 37s on a 01 Tahoe 1500 2WD with a 6" Fabtech & 1.5" body lift. Requires some trimming but it looks amazing!
 

Dillonv2008

Member
Joined
Aug 15, 2013
Posts
30
Reaction score
1
Location
Sac
I had 6" with 3" body they fit fine look good but if mudding you'll rub! From flexin little bit. + you'll have to tighten your tbars all the way up which is going to cause more stress on your wheel hub bearings and cause Camber problems and wear your tires out faster and my 37s were bold to and I was having problems still when turning sometimes and rubbing jus from body flex in sharp turns. I know took my 37s off and have 35s.

---------- Post added at 09:55 PM ---------- Previous post was at 09:54 PM ----------

ynuguhun.jpg that's mine with 37s

And this is it with the 35s on 20s 7anu3yvy.jpg
 

Forum statistics

Threads
132,089
Posts
1,862,196
Members
96,558
Latest member
Woodman87

Latest posts

Top