Imeansbusiness
TYF Newbie
- Joined
- Sep 27, 2021
- Posts
- 1
- Reaction score
- 0
Does anyone know of a good instructional video or have tips for wiring a manual switch to my E fans. I have a 2005 Yukon slt and the fans never kick on, I know they work, they will kick on if i pull the ect sensor But otherwise will not. Even if the vehicle starts heating up sitting in traffic or at a drive thru etc.
I know I should track down the true root of the problem but for the time being i was thinking of just doing A switch, but I’m unsure the best way to go about it. Ideally I would like to wire them directly from the fan wires just To a switch in the cab, it doesn’t need to be super complex I was thinking only wiring the high setting just so I can flip them on when needed.
any advice or input is appreciated TIA!
I know I should track down the true root of the problem but for the time being i was thinking of just doing A switch, but I’m unsure the best way to go about it. Ideally I would like to wire them directly from the fan wires just To a switch in the cab, it doesn’t need to be super complex I was thinking only wiring the high setting just so I can flip them on when needed.
any advice or input is appreciated TIA!
