Wrenching in the gravel?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Walchit

Full Access Member
Joined
Aug 29, 2021
Posts
447
Reaction score
911
I'm about to do the suspension on my XL, and I have gravel outside of the garage. I am wondering if anyone has tried laying tar or liquid asphalt over the top of gravel, or maybe doing a chip and seal type of thing. I wanna be able to move my jack around easier.

My other thought is a big piece of carpet, which is probably what I will end up doing for now. Maybe a few smaller pieces so I can move them inside if it rains
 

bigdog9191999

Full Access Member
Joined
Feb 3, 2020
Posts
869
Reaction score
1,018
Location
sw michigan
have also used some rectangle pieces of thin carpet ( think like indoor/outdoor carpet) as something to lay on. a same buddy also uses some plastic sheets that are corrugated like cardboard ( think thick yard signs)
 

Fless

Staff member
Super Moderator
Joined
Apr 2, 2017
Posts
11,904
Reaction score
24,245
Location
Elev 5,280
I have used sheets of plywood and also laid on cardboard. I went to an appliance store and they gave me a complete thick cardboard box that a refrigerator was shipped in and then I cut it for 2 sheets of large cardboard.

x2 on a piece of plywood or OSB, and maybe a blanket or carpet on top of that. No carpet where the jack base sits. Rough gravel is going to poke through cardboard.
 

Joseph Garcia

Supporting Member
Joined
Aug 2, 2018
Posts
7,352
Reaction score
9,942
I have some 1/8" steel plates that I use with my gravel driveway. 2 of the plates are 2'x2' which I use for the jack stands, and the 3rd plate is 2'x4' which I use for the jack.
 

Forum statistics

Threads
132,381
Posts
1,867,087
Members
97,017
Latest member
97ext
Top