Yukon AT4 Storage Lid

[Fast_AT4]

Matchy Matchy.

 

[Fast_AT4]

V2: Now with side supports to act more like a flip up lid vs just a cover insert.

Think for mine going to do a clear lid and do sublimation on it...maybe like a Blue Ridge GA or out doors theme...we shall see.



Video of usage on my Etsy

 

[WalleyeMikeIII]

Or, just get a Denali, and you get one from the factory in open pore wood matching your interior color...plus a cover for the cup holders too in same material.

In all seriousness, nice work!! I think your implementation will work for all non Denali GMC, and all the Chevy Trims. Escalade has different console, so it is out of the running.
A suggestion: Maybe a couple little notches/slots on the edge so that a passenger who wants to use the USB or Power ports could pass a cord through the edge and keep the cover in place. At least offer as an option.

 

[Fast_AT4]

Or, just get a Denali, and you get one from the factory in open pore wood matching your interior color...plus a cover for the cup holders too in same material.

In all seriousness, nice work!! I think your implementation will work for all non Denali GMC, and all the Chevy Trims. Escalade has different console, so it is out of the running.
A suggestion: Maybe a couple little notches/slots on the edge so that a passenger who wants to use the USB or Power ports could pass a cord through the edge and keep the cover in place. At least offer as an option.

I can always do a clear one, sublimate a picture of wood .

There is notches on both sides:


Mine is still black...still thinking of what to do. Could sublimate a nice image like:


Or

 

[Fast_AT4]

Went for the Florida coast line. Sublimation and then white paint on the back.


Edit: option added to listing to add your own image.