Zero offset

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Fg8or

TYF Newbie
Joined
Aug 12, 2016
Posts
24
Reaction score
12
Thinking very seriously about this wheel for the 07 suburban. 18”x9 with a zero offset. My local dealers say they are nationally back ordered however I can find them online. My question is will they work with my Toyo 285/65 r18s I already have? I have the OEM 18s with +31 offset now and a 2” supreme suspension level kit up front 2.5 with 5100s on rear. Another local dealer I checked with today said zero offset will not work because it may rub ball joints. I’m confused to say the least. . a9d1019d0f40b320dafc841b32a8ca00.jpg72fe7e49c07d9c96b794350a2962b52f.jpg


Sent from my iPhone using Tapatalk
 

kbuskill

***CAUTION*** I do my own stunts!
Joined
Mar 11, 2017
Posts
5,309
Reaction score
8,318
Location
NE. FL.
Second dealer is clueless.... a zero offset would make the wheel stick out further which would actually give more ball joint clearance.

With that being said.... that DOES NOT necessarily mean that these wheels will fit your truck as they may stick out so far that they would rub your fender when turning. Further research is required.

Just keep in mind...

Positive offset = face wheels

Negative offset = deep dish

This is not set in stone but a good rule of thumb.
 
Last edited:

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
26,247
Reaction score
39,347
Location
Stockton, Ca.
have you already added a 2' lift? if not the kit runs about $50-60, there's some work involved for install, that might be just enough.
 

Matt_

Full Access Member
Joined
Jul 10, 2016
Posts
445
Reaction score
485
Looks great!

Trim the plastic bumper support bracket, then use zip ties to pull the fender liner back for more clearance. I also hit my liner with a heat gun so it retains the "new" shape naturally for less pull on the zip ties.

2016-08-21 11.29.12.jpg

20171125_145900.jpg

20171125_150137.jpg
 
Last edited:

Forum statistics

Threads
132,366
Posts
1,866,807
Members
96,989
Latest member
Mreedini
Top