Search results

  1. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Tahoe made it to work and back so I’m calling the ECT issue mended. I think my next thing to do on it is fix the exhaust. The QTP cutout quit working so I need to diagnose that (prob another burnt up motor from holding the switch to long). If it’s bad I’ll probably just redo the whole damn thing...
  2. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Those Deaver 64” springs in the rear do the lords work well! The hydro bumps were working well along side them as well. The front is no slouch either, but the front has a lot more down travel than up and doesn’t look as obvious in pics. Iirc I measured 14”front and 17” rear. But I think the rear...
  3. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Pretty sure I fixed it, the pintail had been sliced previously and it looked like the splice had failed. All fixed and survived a run to the only store in town, the one and only MOPHOin Dollar General. Where I picked up some washing chemicals and gave this sloot a scrubbing. Also gave my...
  4. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Well my wiring replacement didn’t fix my issue. Tahoe almost left me stranded after it stalled and wouldn’t start twice on my ride home. I think I found a splice in the ECT sensor harness wiring that could be bad. I ended up wiggling it after it wouldn’t start and it made it home after that. So...
  5. Dantheman1540

    2004 6.0 NV4500 Tahoe

    I’d prefer you come trim around my piece :p
  6. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Actually spent 30mins looking for this trim piece. I almost thought I threw it out on accident. Eventually I found it under the back seat of the Tahoe luckily not crushed.
  7. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Shifter dohicky removed, now I gotta remember where I stashed the manual trim piece.
  8. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Feels good to be working on this again and fine tuning some stuff that had really really really aggravated me for a long time lol.
  9. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Ok it’s not bad at all, once the column trim is removed it’s just two T25s and 4 connectors which are easy to get to. The lower T25 is kinda a pain in the butt, your probably supposed to remove the steering wheel, but that’s a lot of work and I made it work with a T25bit in a 1/4” wrench. Taping...
  10. Dantheman1540

    2004 6.0 NV4500 Tahoe

    When your snipped, raw dog is life.
  11. Dantheman1540

    2004 6.0 NV4500 Tahoe

    I think I’ll attempt it in the morning, I’ll pull the one out of my RCSB
  12. Dantheman1540

    Free to me 1996 GMC

    Went down and cleaned my shop up a bit before work and drove the dirt road way in the gmc. I’ve got close to 30miles on it so far with no issues, I think that warrants getting a spare set of keys made. Anyway decided I’d see how bad this 4l80 first gear is and it impressed me! 1st gear and...
  13. Dantheman1540

    Free to me 1996 GMC

    I was actually looking for what plate I should get not the verbiage because the trucks kinda too stock imo for a custom name plate. But I might do like save the cougars or something plate. There’s so many options in fl it crazy.
  14. Dantheman1540

    Free to me 1996 GMC

    I must let you know, the PO of this truck showed me some play bois on like my 12th B day when he took me shooting, with no hearing protection. Anyway he would approve of these ideas
  15. Dantheman1540

    Free to me 1996 GMC

    How about LORGEKAK, BIGWANG, or COKBBIG?
  16. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Fix it and let me know what the problem is lol
  17. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Installed the harness, all seems good for the 5mins I let it idle. Both fans kicked right on with AC on blast and no engine lights. Another thing I think I need to replace is the turn signal doodad. When I hit the turn signal right it flashes the brights on. They easy to do?
  18. Dantheman1540

    Free to me 1996 GMC

    Your getting old and your mind is slipping, gonna have to have an AI read you forums soon. I’m pretty happy with it, I originally thought it was an older Toilet bowl injected 350 and turbo 400 and was prepared to just scrap it. But the vortec 350 is decent and nobody can dispute a 4l80 is a...
  19. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Go check out my thread https://www.tahoeyukonforum.com/threads/free-to-me-1996-gmc.147508/
  20. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Bit of a mopho pulling the Efan harness out of the harness on my RCSB. Looks in great condition tho and I made it a little over with some wrap and tape. I’m thinking that possibly the issues I had all came because of where the PO grounded the harness he installed. The one I removed off the...
  21. Dantheman1540

    Free to me 1996 GMC

    Made a tad more progress. Got the doors finished up with new handles on the outside, sound deadener on the inside, new JL Audio C1s, and slapped the panels back on after a good scrubbing. Also swapped out the 4x4 selector and the HVAC control panel as they were both pretty busted. Lastly the GMC...
  22. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Hopefully, I’ll be pretty mad if it doesn’t. I’ve had so many small electrical gremlins with this thing over the years. Makes me want to buy a carb on it and delete all electronics
  23. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Got the factory style efan harness the PO installed out of the Tahoe, man it’s roached. No idea what caused the issue other than it appeared to have melted at some splices, not sure if I did those or he did. I know the first bit of efan trouble I had was relays burning up. So tbh no idea if even...
  24. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Missed me?
  25. Dantheman1540

    2004 6.0 NV4500 Tahoe

    Spent 3 hours shampooing this turd today. Not new looking but atleast it smells nice. I’ve had great momentum working on my new to me gmc a few hours in the morning and an hour or so in the evening when it’s still fairly cool so I think I’m gonna transition that time to the Tahoe. All this will...

Forum statistics

Threads
129,431
Posts
1,815,944
Members
92,646
Latest member
TU1881

Latest posts

Top