-
-
Nothing wrong with that approach. You can pull the front cover off later and carefully get the bolt out for the pickup tube at the... -
thefrey replied to the thread Identifying 2013 6.2 Tick (attached video).The last owner did the lifters himself so i can only hope he did it correctly. I appreciate the wealth of knowledge. Does it make...
-
.... Keep in mind if you're above 200,000 miles, it's not uncommon to be a little bit of everything listed above. And don't forget to...
-
Yes, low oil pressure can cause this. So can cheap aftermarket lifters installed 10,000 miles ago.... And it could simply be the o-ring...
-
thefrey replied to the thread Identifying 2013 6.2 Tick (attached video).So the guy who owned it before me said he went to the GM dealer for lifters. So i can only assume they were new OEM. I did just hit...
-
thefrey replied to the thread Identifying 2013 6.2 Tick (attached video).Would oil pressure help at all to fix this? My guess is it’s a sticky lifter since sometimes it will be anywhere from very audible to...
-
thefrey replied to the thread Identifying 2013 6.2 Tick (attached video).So i did the DIY stethoscope and it sounds like it’s coming from the passenger side. Kind of sounds like somebody clicking a mouse...
-
thefrey replied to the thread New to me project 13 Yukon XL Denali.Nope but there is a little bit on the headliner!
-
thefrey replied to the thread New to me project 13 Yukon XL Denali.Not sure if I’d recommend this but it did work lol I took dawn and sprinkled it all over the carpets and then put oxy clean powder...
-
thefrey replied to the thread New to me project 13 Yukon XL Denali.I just saw your edit haha. The funny thing is that it was dry in this photo. The only thing I had put on there was dawn dish soap and...
-
the front end links on the gtm900's are known to just "break off" from either just general wear, rust, age,etc just go buy a couple and...
-
I doubt it’s because they needed more suspension travel for off-roading. More likely the mount point is broken off on the p/s from the...
-
thefrey replied to the thread … there’s no sway bar end links??.Both sides are missing the end links… so I’m not sure if it would be the mount point? I’m just confused lol Are you suggesting to...
-
So I picked up my 2013 Yukon XL Denali with 197k and it’s definitely been a project vehicle. I’ve had it for about 2 months now and put...
-
-
thefrey replied to the thread Help with heater coolant line.Thank you. I already ordered everything and am using OEM hose but went with Dorman connector, maybe not the best idea but it was half...
-
-
Loading…
-
Loading…
