-
-
Sam Harris reacted to Fless's post in the thread 2005 starter wiring diagram/schematic - SOLVED with
Like.
Diagrams at www.charm.li... -
Sam Harris reacted to Fless's post in the thread 2005 starter wiring diagram/schematic - SOLVED with Like.
Yes, many have solved it. Try doing a voltage drop test. You may have a bad positive or negative cable, or a bad engine-body ground...
-
Every GMT800 extant should be maintained with the following GM OE UPDATES: GM OE 2006 KW1 Alternator GM OE 2006 Electrical Fans Update...
-
You're welcome, @Tonyrodz !
-
Thanks Nick!
-
This one should work...Shows the entire valve body being reassembled, including the installation of the solenoids:
-
Great. Thanks Nick. Do you have a yt video you could recommend on doing the job? Only transmission related work I've ever done was...
-
Hi Tony, contact Transpartswarehouse.com - they should have what you need. They are also on eBay under a few diff user names as well...
-
In search of a reputable source for some shift solenoids for my 03. I definitely don't trust Amazon. Looking for Solenoids A and B--I...
-
If you are talking about the connector, to the right of the power steering pump reservoir cap and to the left of the red possitive cable...
-
Agree, clean the MAF. Did you have the air snorkel off the throttle body? If you did, you did not say so. Make sure it is seated...
-
If that fails, pull some more data. MAF reading in g/sec at hot idle (also show rpm). Do a fuel pressure test with the engine running...
-
If it hasn't been done do a CASE relearn with a bidirectional scanner, just to rule it out. That correlates the crank sensor signal to...
-
It still makes a misfiring code come on as pending/stored. I’ve been dealing with the check engine light for a couple days now on that part.
-
It works; on mine I had to download it. If the misfire counts are that low (<10) I wouldn't worry about them. Having said that, #1 #4...
-
-
Loading…
-
Loading…
