-
-
DMy chrome 22’s leak 2-5lb a day if they’re not prepped correctly. The chrome on the beads is inferior on the OEM Esky Plat rims. Once...
-
Dmy original oem chrome wheels are now 13 years old and they are perfectly fine, never have had a single issue even if the bead get's...
-
DMy last 2 Denali's had factory chrome wheels and never had any problems with bead leakage. Dealer filled tires with Nitrogen which...
-
DDON'T BUY CHROME So had similar issues with my aftermarket wheels. After a few years I kept getting small leaks etc and went crazy...
-
Ddkad260 replied to the thread Front seal replacement question.I checled it out, very nice write-up....well done...thanks!
-
Ddkad260 reacted to skpyle's post in the thread 2013 Escalade ESV Next BIG adventure: Cooling system refresh, Big 3 Electrical upgrade, Reseal intake, and VLOM mod... with
Like.
I chose to use a new torque to yield bolt to retain the new crankshaft pulley. I looked at the ARP bolt, and decided I would be OK with... -
Ddkad260 reacted to skpyle's post in the thread 2013 Escalade ESV Next BIG adventure: Cooling system refresh, Big 3 Electrical upgrade, Reseal intake, and VLOM mod... with Like.
Old OEM crankshaft pulley at left, new OEM GM 19300488 pulley at right. Backsides of the pulleys, old at left, new at right. The...
-
Ddkad260 reacted to skpyle's post in the thread 2013 Escalade ESV Next BIG adventure: Cooling system refresh, Big 3 Electrical upgrade, Reseal intake, and VLOM mod... with Like.
Luckily for me, the removal tool did not slip off and the pulley started moving off the crankshaft snout with me just using a long...
-
Ddkad260 reacted to skpyle's post in the thread 2013 Escalade ESV Next BIG adventure: Cooling system refresh, Big 3 Electrical upgrade, Reseal intake, and VLOM mod... with Like.
OK...main event: the pulley itself. I had read posts of people having a heckuva time getting the old pulley off. Requiring heat and...
-
Ddkad260 reacted to skpyle's post in the thread 2013 Escalade ESV Next BIG adventure: Cooling system refresh, Big 3 Electrical upgrade, Reseal intake, and VLOM mod... with Like.
Saturday, I successfully replaced the crankshaft pulley and bolt, front crankshaft seal, and the crankshaft position sensor (CKP)...
-
DPlease read posts #59 through #63 on my post in this thread...
-
DOEM 22" wheels off a Silverado.
-
DYou might as well get the tool that holds the flywheel utilizing the starter mounts. Why you can break the crankshaft bolt loose with an...
-
Dnormal or RH thread, & no keyway. If you use an impact there is no need to hold the crank to remove the bolt. New GM bolt is 1 time use...
-
Dno keyway. there's a engine stop tool that you remove the starter and bolt in place that has teeth that engage with the flywheel to keep...
-
-
Loading…
-
Loading…
