-
-
FFoggy replied to the thread Cold start rough idle..Bi Directional Scanner. You will be able to look at fuel trims as well as alcohol fuel % These flex fuel engines use "virtual" info...
-
FFoggy replied to the thread Cold start rough idle..Don't know what year you have, etc But try a fuel trim re learn/reset procedure esp if it is flex fuel and maybe try a higher grade...
-
FEither leave it and when is dry, seal the seam(s) with silicone. Or, some how dry it out yourself but am unsure how.
-
FFoggy replied to the thread Tail Light with Moisture.I'll remove it (again) and dry it out. Hopefully no more winter strorms I'll re seal it with the flowable silicone stuff Thanks for...
-
FSet the assembly in the sun with the bulbs removed and the lens facing up for a couple of hours.
-
FLeft Tail Light housing on my denali has moisture in it.... Both tail lights are in excellent condition so I don't want to have to buy a...
-
FFoggy replied to the thread 2012 Suburban Misfire #5 drama.I would suspect that the wiring/ ground to that side of the coil packs harness has some issue. There seems to be no/not enough 'fire'...
-
FFoggy replied to the thread What are the differences between these two ACDELCO shocks?.Obviously totally different application... But it looks like Abdullah left the chat !!!!!!
-
FFoggy replied to the thread While I’m at it….Motor mounts as mentioned ...
-
FFoggy replied to the thread Engine fan question.Stock fan settings in HP tables kick ON the low speed fans at about 216. Then High Speed ON at around 224 The problem is that they...
-
FInteresting: https://www.lsxmag.com/tech-stories/l8t-to-the-party-indirect-effects-with-direct-injection/
-
FFoggy replied to the thread Help with heater coolant line.Nice work. Thanks for the info and pics. I'll be inspecting them soon. I've replaced everything else since I bought mine in 2019
-
FFoggy replied to the thread Help with heater coolant line.The heater hose that "Y's" out down by the thermostat housing has a good replacement for it as well. it has a metal Y instead of the...
-
Fyes, ethanol/alcohol fuels are corrosive and absorb water. which is a good reason it really shouldn't be in our normal gas. e10/15 in...
-
FFoggy replied to the thread Valvoline Restore & Protect experiment.Definitely need a real alcohol sensor to run E85 (which is usually e70).. These virtual fuel sensors that just use the O2's are so...
-
-
Loading…
-
Loading…
