89Suburban's latest activity
-
Thanks for sharing that... but OMFG. No way can that be done without pulling the engine??? Have to take the balancer off for which I'm... -
https://www.rockauto.com/en/moreinfo.php?pk=1399857&cc=1432895&pt=5604&jsn=798&optionchoice=0-0-1-1 At RA, it is listed as a crankshaft...
-
-
Strong possibility this is source of splatter along subframe in that area. I can see a small amount of coolant towards bottom of engine...
-
@TollKeeper, sounds like your memory is spot on. I wonder one thing though. Has the cooling system been pressurized with a coolant...
-
@OR VietVet - Hopefully you can help my memory here... If memory serves correctly, the water pump bolts to the timing cover, and there...
-
@bigdog9191999 thanks! I'll run through that list. @B-train LOOKS EXACTLY like where the big puddle is under. I wouldn't be surprised...
-
I chased a mystery leak on my daughter's 2008 Lucerne 3.8L. Did a Google search after racking my brain and found 1 thread that mentions...
-
I will start at the coolant inlet on the driver's side in the intake where the thermostat is. And just follow the cooling system around...
-
89Suburban reacted to Mege's post in the thread Wire harness under rear bumper for tail light with
Wow.
Thanks for the response! Here is the picture of the harness I’m looking for. I can only find the tail light wire harness that fits... -
89Suburban replied to the thread Wire harness under rear bumper for tail light.@915_Tahoe @rockola1971
-
89Suburban reacted to GREMINGTON's post in the thread 2008 Tahoe No Start after DOD Delete with Sad.
2011 Tahoe 5.3 LMG. Did the DOD delete. Will not start now. Scanner tool says cam and crank are not aligned. Gears are dot to dot. Had...
-
Final Update - I was able to reset the cam gear without having to drop the oil pan. I got the timing aligned and put in a new cam...
-
SOLVED. I did not seat the cam timing gear all the way even though it bolted in fine. I pulled the camshaft position sensor this...
-
I could use some help. I did a DOD delete with a Texas Speed kit including GM non-DOD cam, LS7 lifters, new push rods, and replaced most...
Forum statistics
Latest posts
-
DIY Mid & Long LCA's / UCA's.....and everything else you'll need to have and know- Latest: 5StarCustmSolutns
-
-
