SpareParts's latest activity
-
SpareParts replied to the thread OK, Bought a 07 with a couple problems today..Ok so i decided to play sick today from work and change that oil pump. Started at 9AM and done by 1:45pm so not to bad and had a couple... -
-
SpareParts replied to the thread OK, Bought a 07 with a couple problems today..Looks like im not going to get this engine changed before it just gets too cold and s4ity out sadly. I'm really thinking about this...
-
SpareParts replied to the thread OK, Bought a 07 with a couple problems today..Also found a great parts cleaner. Gets old varnish and gunk off pretty good. I tossed the parts in a bucket and let them soak for a...
-
-
SpareParts replied to the thread OK, Bought a 07 with a couple problems today..Thanks to this bearing, i will never have to work about the 8 seals under the valley cover.
-
-
SpareParts replied to the thread OK, Bought a 07 with a couple problems today..It's cool. More info on these trucks helps everyone:driver:
-
SpareParts replied to the thread OK, Bought a 07 with a couple problems today..That would sure work. Im installing a new one with the wrecking yard engine. I also do not believe the old one is bad.
-
SpareParts reacted to blondie70's post in the thread OK, Bought a 07 with a couple problems today. with
Like.
When my engine was out for the cam job, I installed a 1 foot grease gun hose for the oil pressure sensor. Got fittings off ebay. Now the... -
SpareParts reacted to Jims2013Yukon's post in the thread OK, Bought a 07 with a couple problems today. with Like.
I had low pressure on my 5.3 with 180k miles. So I dropped the oil pan and replaced the o ring on the oil pick up tube. Increased oil...
-
SpareParts replied to the thread OK, Bought a 07 with a couple problems today..Yes everything is from Rock Auto and GM, ACDelco, Felpro. You get the idea. Nothing from ChingChong China. I only use name brand, where...
-
SpareParts reacted to petethepug's post in the thread OK, Bought a 07 with a couple problems today. with Like.
As you can see the oil press sensor is conveniently located at the back of the motor and easy to access (as long as the motor is out)...
-
SpareParts replied to the thread OK, Bought a 07 with a couple problems today..Did you see Post #31? My guess is cam bearings are chewed up.
-
SpareParts reacted to mikeyss's post in the thread OK, Bought a 07 with a couple problems today. with Like.
Hmmm.. When I was doing my research before building my 6.2, I remember it being the 5364 heads that had issues. When I get off work...
-
SpareParts replied to the thread OK, Bought a 07 with a couple problems today..My thinking is it has ran this long. If I going to start putting different heads on it and stuff I might as well rebuild the bad one in it.
-
SpareParts replied to the thread OK, Bought a 07 with a couple problems today..Though of that. Have a 5.3 here and asked if that would work. Big NOPE! Good try though;)
-
SpareParts reacted to mikeyss's post in the thread OK, Bought a 07 with a couple problems today. with Like.
You may want to Google info about those 5364 heads. I believe they have some issues, so if your current engine has 821/823 heads, use...
