strutaeng's latest activity
-
My father in law bought the Tahoe new and I bought it from him in 2005. It's never been in a wreck. I do need a copy of the specs. I... -
'03 will be a return-style fuel system so, yes, the fuel pressure regulator could incorrectly cause lower pressure by sending fuel back...
-
It is a 3.08 limited slip posi with the gov locks. There are 2 marks on the spider gears and on the side gears inside the differential...
-
strutaeng replied to the thread 2011 Tahoe Spider Gear lineup."Marks on the gear to line them up"? Never heard of this? What axle is this? The shims/spacers are supposed to be tight fit, to...
-
strutaeng replied to the thread 96 Tahoe LT drifting right.What do the LCA bushings look like? Crawl under there a do a quick visual. Sounds plausible that if they are indeed badly worn...
-
Where do you suggest I go from here since I’ve already replaced the fuel pump?
-
strutaeng replied to the thread Hesitating to Start.I didn't know this. I thought it was possible for a faulty FPR to send excess fuel back to the tank, causing a low fuel system pressure...
-
FYI the FPR has no effect on the fuel pressure when running KOEO tests. On your system it works using supplied manifold vacuum, which...
-
Engine tech gaskets and parts are probably the most widely used in the engine rebuilding industry. From what I've read over the years...
-
strutaeng replied to the thread What did you do to your NBS GMT800 Tahoe/Yukon Today?.I replaced the front brake hoses on my 06 suburban daily driver. One of the hoses had a fray. It was on the sheathing and I'm sure it...
-
-
strutaeng reacted to latvius's post in the thread What did you do to your NBS GMT800 Tahoe/Yukon Today? with
Like.
Had my mechanic install the blend doors and had it detailed, I got plenty of heat now! I also have my dual zone as well! Things of note... -
It would be helpful if there was some vehicle and drivetrain info in your signature. Not all are the same. For fuel pressure...
-
strutaeng replied to the thread Weird head gasket.They are probably MLS (multi layer steel?). And yes, they are riveted together. I've only used the Felpro version of them. There's a...
-
strutaeng reacted to Fless's post in the thread Dads old 2000 Silverado K1500 Z71 (a restoration tale) with Like.
Sounds like you have a good plan in mind. Be sure to post some regular updates for us!
-
strutaeng replied to the thread Dads old 2000 Silverado K1500 Z71 (a restoration tale).Nice project! I've got a 99 version in 2wd in my avatar. Had it since college. Bought it in 2008 from the original owner. 99-02...
