2003 Tahoe CV Halfshaft carnage

[rockola1971]

Never seen a halfshaft cage come apart like this before. As you can see in the pic there was still grease in the joint. The cage said no more and all of the ball bearings but 2 said hey hey good bye. Made a clicking sound like a bad hub but otherwise drove fine. I deferred the new halfshaft install to tomorrow and just left the stub in the hub. Im no longer 25 anymore. Dont have the patience or attitude for immediate vehicle maintenance anymore. Especially parts that decide to die in the winter.

 

[Scottydoggs]

that cv joint likely owes you nothing lol

if you got a grease splatter line under the truck that boot had been leaking for a good while already. cause theres not very much grease on that really.

 

[rockola1971]

that cv joint likely owes you nothing lol

if you got a grease splatter line under the truck that boot had been leaking for a good while already. cause theres not very much grease on that really.

Grease was all up in the outer boot where that cage was supposed to be assembled before it ejected. I literally just unbolted halfshaft from diff and pulled halfshaft out of the outer joint to remove it. Halfshaft is 7-10 yrs old. 4x4 usually only used in winter for 4-5 months and only on snow/ice days. Otherwise halfshaft is just there freewheeling with no torque applied to it.

 

[Scottydoggs]

i get all that. but lack of grease is what normally kills them. aka rip in the boot and grease slung around.

 

[rockola1971]

i get all that. but lack of grease is what normally kills them. aka rip in the boot and grease slung around.

I was kinda hoping it was the amazing amounts of HP that my 5.3L but I am sadly disappointed.

 

[Scottydoggs]

I was kinda hoping it was the amazing amounts of HP that my 5.3L but I am sadly disappointed.

im waiting for the day i chuck one in my camaro. i know that will be purely from HP., as its got 600 whp.