3rd row seat removal Premier Edit:deck added

Dave Jr · Apr 15, 2018

Tools needed:
15mm socket and ratchet
Small screwdriver

Start with removing the accessory tray:
Remove Matt
Remove “thumb” screws
https://www.flickr.com/gp/163893409@N03/13jcz8
https://www.flickr.com/gp/163893409@N03/3fw880
After removing screws simply lift out container

Remove the aft 4 10x1.5mm hex bolts (silver) using 15mm ratchet.

***Raise the seats
Remove 3 access covers and 3 forward retaining bolts
https://www.flickr.com/gp/163893409@N03/Qr2Y70
After bolt remove I replaced the covers
***Lower the seats
Have your screwdriver handy and roll the seat section up
https://www.flickr.com/gp/163893409@N03/WT98d8
Unplug the electrical connection lifting the tab with screwdriver
https://www.flickr.com/gp/163893409@N03/0dhW4N
Your all set! Remove the seat assembly
https://www.flickr.com/gp/163893409@N03/AiJ23r

I will be adding a proper deck with spacers I’ll add to this post
Just remember to bag your bolts and wrap the seats for storage...
For now a weathertech insert works fine

cardude2000 · Apr 15, 2018

Impressive. Nice work and great pics.

Now you almost have as much room as a small minivan! ;-)

Sent from my iPhone using Tapatalk

Undeserving · Apr 16, 2018

interesting. Not sure I am ready to remove my rear seat but would like to flatten the rear cargo area. It seems to me that the under cover storage are is about useless for anything othern than stashing a couple of pizza boxes and that it slopes to the rear hatch. Can you just remove the storage area and be left with what looks like a finished flat floor???

Dave Jr · Apr 16, 2018

My biggest hassle was the slope aft, not to mention the height. Was surprised how easy seat section came out. Worth taking out for day to day driving and installing in the rare occasion you need it. Just ordered the plywood to make a deck. I’ll post dimensions, bolt locations, spacer heights and such.

Dave Jr · Apr 29, 2018

Deck added, quick post will add more legible dimensions later
Tools/equipment needed:
3/8 plywood 48x40 inch
T45 torq to remove seat belt retainer
5/8 hole saw
6 10x1.5x60mm bolts
Hot glue gun or double sided tape
Fender washers
7/8 inch spacer material
1/4 inch spacer material

Basic dimensions

Showing holes, made it pretty close. Will refine the dimensions later

Dave Jr · Apr 29, 2018

Tuck the plug for the motor control under the trim panel

I used a hot glue gun to secure the spacers. Double sided tape works too. I used cut-offs from a bushing project using a lathe and some scrap teak.

Dave Jr · Apr 29, 2018

Ran outa time. Was summoned for a COSTCO run
Want to use double sided tape to seal the edges
Paint the hardware mat black

BEIS · May 2, 2018

Just an idea: maybe get a piece of carpet (like the rest of the truck) cut, and bolted down, then the Weather Tech mat on top. That way, you won't catch/rip any objects in the back placed on the protruding bolts. Also, this would enable you to easily dump out/clean the removable mat (instead of having to unbolt it like shown). Just an idea, but I really like what you did here. Great job!

Dave Jr · May 2, 2018

BEIS said:
Just an idea: maybe get a piece of carpet (like the rest of the truck) cut, and bolted down, then the Weather Tech mat on top. That way, you won't catch/rip any objects in the back placed on the protruding bolts. Also, this would enable you to easily dump out/clean the removable mat (instead of having to unbolt it like shown). Just an idea, but I really like what you did here. Great job!

I’m probably going to go with some cup style or counter sunk washers to put a positive hold on the liner. When I have my tools in the back the liner slides all over and winds up folding.
But your right, a flush solution is better!

Something like this with a plastic cap

Undeserving · May 2, 2018

Was the ops vehicle a swb or lab to begin with? The behind the 3rd row space has me guessing swb

3rd row seat removal Premier Edit:deck added

Dave Jr

Member

cardude2000

Full Access Member

Undeserving

Mitch and Murray sent me.

Dave Jr

Member

Dave Jr

Member

Dave Jr

Member

Dave Jr

Member

BEIS

Member

Dave Jr

Member

Undeserving

Mitch and Murray sent me.

Similar threads

Forum statistics

Latest posts