SOLVED - Cylinder 7 misfire

InterceptorF · Dec 4, 2022

I think the issue was the lower o-ring on the #7 injector, it looked wonky, but I had a replacement injector so just replaced it. The engine smoothed right out. No test drive yet as I also replaced the oil pump and o-ring so the oil pan RTV is curing. It's so much easier to drop the oil pan with the 6" lift; still not 'easy' but does help! Hoping all this work on it the past couple of months is coming to an end.

InterceptorF · Dec 5, 2022

RESOlVED: It was definitely the #7 injector! Runs smooth and no codes are being thrown! Also the oil pressure is back to a solid normal >> 38-- 46 psi.

Tonyv__ · Dec 5, 2022

InterceptorF said:
Holy Crap! Yes, I did check my cam through the lifter bore - it was fine but I did replace the injector and the engine smoothed right out.

Good. Would suck to have to rip it all apart again.

Rocket Man · Dec 5, 2022

InterceptorF said:
RESOlVED: It was definitely the #7 injector! Runs smooth and no codes are being thrown! Also the oil pressure is back to a solid normal >> 38-- 46 psi.

Awesome. Thanks for coming back and updating the thread.

89Suburban · Dec 5, 2022

InterceptorF said:
RESOlVED: It was definitely the #7 injector! Runs smooth and no codes are being thrown! Also the oil pressure is back to a solid normal >> 38-- 46 psi.

Yay!!!!

RAMurphy · Dec 5, 2022

Always a great day when you resolve an issue. Nice Job.

Joe-ty · Dec 17, 2024

InterceptorF said:
Also swapped coil 7 with coil 3

Why would you swap with the number three? Why don’t you swap with number five? Is there a difference?

SOLVED - Cylinder 7 misfire

InterceptorF

Member

InterceptorF

Member

Tonyv__

Full Access Member

Rocket Man

Mark

89Suburban

Bull in the china shop

RAMurphy

Bob

Joe-ty

TYF Newbie

Similar threads

Forum statistics

Latest posts