RooTBeeRthe1st
Full Access Member
- Joined
- Jul 11, 2018
- Posts
- 1,082
- Reaction score
- 2,456
I think I'm just going to pop-rivet louvers on my hood.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Resurrection complete.Dude, it’s a 13 year old thread….
I want to easily vent the engine bay heat when I get the Whipple under there.I did that on thecopcar. Thinking about it for thethirdtwin.
View attachment 406919View attachment 406920View attachment 406921
I haven’t noticed anything different with heat in the cabin, but it’s heating or cooling 99% of the time.I want to easily vent the engine bay heat when I get the Whipple under there.
Those fit well, where'd you get them?
Also, with just the vent fan running, did you notice it pulling in hotter air than ambient afterwords?
My real "BP" build truck has the hood louvers and they r pop riveted in and fully functionalI think I'm just going to pop-rivet louvers on my hood.
Ya my BP Tahoe came with the same washer bottle above the secondary battery tray. I'm not sure why they had to remove the original bottle.Anybody asking about what to do with the washer fluid reservoir, I forgot I had this from when I went to a factory bumper cover and washer bottle. It’s from an obs truck and I had added a second hole for a rear pump since it’s only got one. It was just hung above the secondary battery tray. I’ve also seen the late square body bottle used on another BP Tahoe.
When the bumper cover is cut, half the stock washer bottle hangs out. They also cut the inner fender linersYa my BP Tahoe came with the same washer bottle above the secondary battery tray. I'm not sure why they had to remove the original bottle.