Ignition Cylinder Bypass/Pushbutton Start Conversion Write Up

NO4NSHIT said:

So I'm I went into the Walmart and I came out and my truck actually starts without a key already without me doing anything so I dropped the ignition switch just to stall people just in case they were going to try to steal it they would have a problem trying to figure out why it won't crank. and of course this is the first time this has ever done this to me where I came back out and I put the ignition cylinder back in or ignition switch back in and I I got no lights on the dash or nothing like it's stuck in neutral or stuck in another gear. So I've tried your idea with bridge in the wire the yellow wire to the white wire and as soon as I turn the key over it automatically tries to start but when it tries to start it's doesn't start and run it just starts like just like automatically shuts off like this has no fuel or something like that. so I'm kind of stumped right now I've been sitting at this Walmart for like an hour and a half now and stupid ass Sanford police keep riding around here and and I really want it good the hell out of here because I hate this town. I pulled the neutral safety switch off and played with it a little bit I don't have it bypassed or anything I can't figure out which wires I need to bypass cuz I read one post on another forum where it said two purple wires but I don't see two purple wires I only see two pink wires and you can't even really tell their pink anymore. So any help would be greatly appreciated right now I am really really stuck up schitt's creek without a paddle right now

Click to expand...

NO4NSHIT said:

So I'm I went into the Walmart and I came out and my truck actually starts without a key already without me doing anything so I dropped the ignition switch just to stall people just in case they were going to try to steal it they would have a problem trying to figure out why it won't crank. and of course this is the first time this has ever done this to me where I came back out and I put the ignition cylinder back in or ignition switch back in and I I got no lights on the dash or nothing like it's stuck in neutral or stuck in another gear. So I've tried your idea with bridge in the wire the yellow wire to the white wire and as soon as I turn the key over it automatically tries to start but when it tries to start it's doesn't start and run it just starts like just like automatically shuts off like this has no fuel or something like that. so I'm kind of stumped right now I've been sitting at this Walmart for like an hour and a half now and stupid ass Sanford police keep riding around here and and I really want it good the hell out of here because I hate this town. I pulled the neutral safety switch off and played with it a little bit I don't have it bypassed or anything I can't figure out which wires I need to bypass cuz I read one post on another forum where it said two purple wires but I don't see two purple wires I only see two pink wires and you can't even really tell their pink anymore. So any help would be greatly appreciated right now I am really really stuck up schitt's creek without a paddle right now

Click to expand...

S33k3r said:

Did you get this fixed?

Click to expand...

NO4NSHIT said:

I did get it fixed it was a hassle from hell I turned out to be the ignition switch for sure and I did what you kind of said in the in the post the only difference was is that I didn't have a push button to use as a starting switch basically like you did I took the overhead light thing down and I took the button out of it and use that I mean I had no other options cuz I was stuck at a Walmart and they don't have those push button thingies that you installed on your dash so I had to sacrifice my dome light for getting home but yes I did finally get it fixed and everything I apologize for the late response I just I've been dealing with one thing after another sometimes and now I keep getting this p 1626 code and well I mean it does it and it gives it to me while I'm driving down the road so it's not like it causes it not to start it just keeps giving me that code

Click to expand...