DFM disabler released
- Thread starter 66 Galaxie
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Kpwweb
Full Access Member
- Joined
- Dec 11, 2015
- Posts
- 698
- Reaction score
- 302
The Range device does eliminate both. However, some of us already have the auto start/stop eliminator installed. I, too, was wondering about both installed and if they would conflict. I am glad to hear there are no issues with both.
KMeloney
Full Access Member
- Joined
- May 2, 2009
- Posts
- 2,829
- Reaction score
- 284
Exactly why I asked. I have the ASE installed, and I wouldn't want to uninstall it if there's absolutely no reason to.
CMoore711
Full Access Member
- Joined
- Jul 18, 2017
- Posts
- 1,286
- Reaction score
- 1,101
I just watched the video of that ASE start/stop eliminator installation, I guess that device is pretty involved on the installation too with the removal of some of the dash trim pieces to the left of the steering and such...
But it's still reversable and you can uninstall it and revert back to stock.
Now Range has a single device that offers both start/stop eliminator and DFM disabler. If it were me I probably wouldn't leave both devices installed regardless if they played nice together. I'd just uninstall the ASE and install the new Range device and list the ASE for sale on here to recoup a couple bucks.
One less aftermarket harness installed seems like the better safer long term option, though it is a little extra work.
New here. New owner of a 24 Yukon. I dove deep into this topic and trying to figure out if it’s the best move for me. I came across this YouTube comment and wanted to post it here for discussion. This gentleman brings up a good point regarding the lack of oil flow to the DFM lifters after running this product long term. Link to video:
Granted, the video is about a 19 Silverado but the concept is the same.
Thoughts?
Thoughts?
Attachments
nick14226
Full Access Member
- Joined
- Nov 22, 2019
- Posts
- 240
- Reaction score
- 231
I thought about that when I had the AFM disabled with a tune on my ‘17 5.3, the system doesn’t get “exercised.” I did switch back to stock for dealer visits.
The DFM Disabler, to some folks disappointment, allows the DFM to function during deceleration on some rigs, including mine. So it’s still doing its thing but fortunately at a time I don’t notice it or mind.
If I were you with a new ‘24 I’d wait to see what you think. Maybe you’ll be lucky and be one of the people who says it’s imperceptible. If that’s the case, keep it stock, enjoy the slightly better (maybe) gas mileage, and be happy. If you’re like me and the DFM not only is perceptible but also ruins the driving experience of the vehicle on a daily basis you won’t even question whether or not to install the Disabler, you’ll be screaming for it, begging range to ship it faster, and waiting in the driveway for the FedEx truck LOL.
Kpwweb
Full Access Member
- Joined
- Dec 11, 2015
- Posts
- 698
- Reaction score
- 302
I had a previous 2016 tahoe with AFM disabled for about 70-80k miles via a tune. No troubles. Put it back to stock before trade in and no issues whatsoever. I also used a good synthetic oil the entire time.
Cheap oil = expensive problems
Cheap oil = expensive problems
WalleyeMikeIII
Full Access Member
Hi @nick14226, can you elaborate on what ruins your drive on a daily basis. I guess each one these vehicles are different, but in my Denali (which is so whisper quiet in the cabin I cannot even hear the stock exhaust, and really cannot even hear the engine unless its above about 3500 RPM) the ins/outs of DFM are completely unnoticeable. Even with the windows down, the wind noise easily drowns out any drivetrain sounds. (I Must be one of the lucky ones, or maybe on this trim level, it is less perceptible). Also, after disabling, do you notice any fuel economy differences? I routinely get 21+ MPG on flat highways if I keep her under about 73MPH, did 400 Mile round trip last weekend and got 22.1 on the way there, and 21.4 on the way home.
Anyway, I am not saying you are wrong, just more curious on what characteristics of the DFM in your vehicle make your driving experience poor. In my rig, I set the cruise and life is grand, if I need power, I hit the gas, and there is immediate downshift and the 6.2 comes to life and I am off to the races. In town, I never notice it engaging or disengaging...I'm at 30.5k on the odometer, and things are still smooth as silk. That said, my rig is 100% stock on everything engine/exhaust related.
EDIT: I just re-read the whole thread, see your complaint is primarily shudder/vibration at cruise or gentle throttle application (presumably not enough power demand to reactivate all cylinders?)
Is it possible you actually have the transmission shudder issue, and it is just more noticable when DFM is enabled, vs DFM? Do you have the 5.3 or 6.2? That coule be another factor, as could be your performance exhaust?
All good, seems disabling it helped your application...glad there is a solution that works for you.
Last edited:
nick14226
Full Access Member
- Joined
- Nov 22, 2019
- Posts
- 240
- Reaction score
- 231
Initially I thought I lost half an mpg but now I'm at, actually slightly better, mpg than pre eliminator. I'm at 15 MPG average (lifted, heavier wheels and tires, summer fuel, etc).
With that comes a billion variables as does the DFM issues. I noticed it before I started mod'ing, but agree, some or all of what I've done may have made it even more noticeable. Quality of fuel, octane, summer vs winter blend, aggressiveness of tire tread (lot of silverado trail boss complaints out there, duratracs / driveline angles). Could all come into play.
With that said, yes, you're lucky and no, I don't think I'm wrong or misdiagnosing it. Read through attached, especially the "Correction" section, it's kind of unbelievable that's all "normal". This is also the TSB I referenced to prove to a previous poster that L9 disables DFM when stated it didn't.
WalleyeMikeIII
Full Access Member
@nick14226, thanks for that explanation. Makes total sense. As I recall, the Z71 available w/ the 5.3 or 6.2 in 2022 as well, correct? Guessing the 6.2 has a bit more gusto w/ cylinders deactivated than the 5.3, so that could also be a difference; you haven't said which engine you have. For sure exhaust mods would make the changes more noticable....bummer it is so obnoxious for you. Glad you have a solution you can live with though.
