Front end Rebuild

JPVortex · Oct 5, 2024

Hey yall. I have a 02 suburban with 200k miles.

It has all the original steering and suspension components. Which are all worn which makes steering the thing a chore.

Money is tight right now so I need some budget but decent parts that will hopefully last me for the next year to year and a half.

What would you guys recommend? It's bone stock ride height, no modifications there.

Any of y'all have any experience with SKP or any other suspension brands from RockAuto that I can get a solid year out of?

Thanks!

Trey Hardy · Oct 6, 2024

JPVortex said:
Hey yall. I have a 02 suburban with 200k miles.

It has all the original steering and suspension components. Which are all worn which makes steering the thing a chore.

Money is tight right now so I need some budget but decent parts that will hopefully last me for the next year to year and a half.

What would you guys recommend? It's bone stock ride height, no modifications there.

Any of y'all have any experience with SKP or any other suspension brands from RockAuto that I can get a solid year out of?

Thanks!

Kryptonite ball joints and hub assembly’s will outlive the thing for sure 60$ a piece for the ball joints I believe 250-300$ a piece for the wheel bearings
Tie rods maybe go for ac delco because moog and mevotech stuff are junk now a days
Kryptonite tie rods are super stout but expensive maybe they make an oem style one also I know they do for the 07-13 body style.
My inner tie rods I got the hummer style hexagon shaped ones off custom offsets for 60$ I believe

Trey Hardy · Oct 6, 2024

1999-2006 GM 1500 / 6 LUG TRUCK

These products fit; 1999-2006 Chevrolet and GMC 1500 4WD trucks, Chevy and GMC 2000-2006 1500 4WD SUVs

kryptoniteproducts.com

Trey Hardy · Oct 6, 2024

They do have oem style outer tie rods for 60$ a piece I just seen
We did the whole front end package on my buddy’s truck last year and it was insane the difference it made on his steering went from two hands all over the place to driving with his pinky super tight no play at all

Joseph Garcia · Oct 6, 2024

RockAuto.com and GMPartsDirect.com are your 2 best bets for quality parts at lower prices. If you are looking only to 1 solid year out of them, IMO, any cheap aftermarket parts will likely do it for you.

JPVortex · Oct 12, 2024

Think I've decided to go with a 1aauto kit. I've used them before and actually got over a year on a previous truck I owned which was a 6 inch lifted 94 K1500. Only thing that went bad too were the ball joints and the angles on that thing were terrible.

I think 1aauto is on the upper end of crappy parts lol.

latvius · Oct 14, 2024

Make sure you put your new centerlink in correctly it is easy to install backwards and at 200k I wouldn't assume the current one is in right.

JPVortex · Oct 14, 2024

latvius said:
Make sure you put your new centerlink in correctly it is easy to install backwards and at 200k I wouldn't assume the current one is in right.

Will do! I’d assume nothing would line up if it was upside down or something though.

Marky Dissod · Oct 15, 2024

latvius said:
Make sure you put your new centerlink in correctly it is easy to install backwards,
and at 200k I wouldn't assume the current one is in right.

JPVortex said:
Will do! I’d assume nothing would line up if it was upside down or something though.

Problem is, it WILL line up and bolt up.
THEN, when you drive it, you will know something feels very wrong,
but you will stare at it, wondering how and why it all bolted up.

If you feel reasonably comfortable swerving at 10MpH over posted 'limits',
centerlink is PROBABLY installed correctly, take a pic or two before removal, just in case ...
I THINK the centerlink cannot be installed 'backwards', but it can be installed upside down, which is the problem.

latvius · Oct 15, 2024

Upside down, backwards, it's basically if you pulled it off and swivelled it 180 degrees, right to left and left to right of the vehicle. It can be hard to describe other than it is in wrong and YES you can put it in wrong. You can drive it, my Denali was that way for years, my son n laws was the same as well. Eats up your front tires and feels like you are in fulltime 4 wheel drive. I had to argue with my mechanic and what helped me the most was having a 2005 Tahoe in addition to the 2005 Denali so I could look at them and see and show the difference.

Marky Dissod said:
Problem is, it WILL line up and bolt up.
THEN, when you drive it, you will know something feels very wrong,
but you will stare at it, wondering how and why it all bolted up.

If you feel reasonably comfortable swerving at 10MpH over posted 'limits',
centerlink is PROBABLY installed correctly, take a pic or two before removal, just in case ...
I THINK the centerlink cannot be installed 'backwards', but it can be installed upside down, which is the problem.

Front end Rebuild

JPVortex

Full Access Member

Trey Hardy

8” fabtech icon coilovers uniballs 24x14on35/15.50

Trey Hardy

8” fabtech icon coilovers uniballs 24x14on35/15.50

1999-2006 GM 1500 / 6 LUG TRUCK

Trey Hardy

8” fabtech icon coilovers uniballs 24x14on35/15.50

Joseph Garcia

JPVortex

Full Access Member

latvius

Full Access Member

JPVortex

Full Access Member

Marky Dissod

Full Access Member

latvius

Full Access Member

Similar threads

Forum statistics

Latest posts