Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
When I got around to fixing this - my solution was to get a mirror with the auto dimmer feature. Pretty sure it came from some Buick or GM car. I found the harness tucked up in the headliner inside the console space. That was my solution to the problem.
I have my AutoCAL from BBP when I did my tune - happy to share/loan it to you if you just need to borrow one versus buying. Havent used it since loading the files to the ECM.
You're a legend!
if you have a working key then all you have to do is have the blank cut, then insert the working key, turn it to run until security light goes out, then remove it and insert the new key and turn it to run until the security light goes out, repeat with any more keys. then that's it. done. no special equipment or extra programming needed.
That's like omega ouch, especially when I know the transponders can be plucked out of the key itself and we have basic key cutting equipment (albeit for house keys) at work. could have saved like 150 bucks just asking around first. Oh well. It's done and it works (some handiwork was needed to replicate the worn key as brand new). Still need a remote for the wifey though
the remote fob is a different process depending on the year, the 07-09 I think can be done yourself after that it takes tech2 or locksmith, etc
To be specific it's an item I'm not sure I'm allowed to link to but it's on
ya that's the dorman fob & programmer I have sold a bunch of those before. the programmer is only good for 3 uses so be sure to do it correctly the 1st time then you will be to do it again years down the road or something if need be.
