What did you do to your NBS GMT800 Tahoe/Yukon Today?

strutaeng · Oct 30, 2024

strutaeng said:
I got the wiper arms reinstalled on my 06 suburban. I took them off to paint since they were so faded. I also painted the 99 Silverado and my other 04 Suburban along with a rear arm.

I tried grinding off the little "stops" on the later style arms, thinking that would allow them to fold out like the early style, but that didn't do anything. Oh well, I tried, LoL.

And today I reinstalled the repainted roof rack on the 06 which I repainted along with the wiper arms. The previous owner butchered the little mounting pads. The bottom drainage sheets on them were all missing and had TONS of silicone. So I stole the good pads from the 04 (project Suburban) and reinstalled them on the 06 (daily driver.)

I need to hit the wrecking yard to get some pads now for the 04.

ScottyBoy · Nov 4, 2024

Fless said:
I replaced mine with the older ones and it's so great to be able to pull them up and keep them off the windshield while I'm washing it. Or scraping frost and snow...

Excuse my ignorance, but whats the difference between the "old" and "new style " wiper arms? And what year did they change them? I'm guessing I have the "old style" because mine do stay in the up position when replacing the blades or cleaning the windshield. PS, I have a 2001.

latvius · Nov 4, 2024

ScottyBoy said:
Excuse my ignorance, but whats the difference between the "old" and "new style " wiper arms? And what year did they change them? I'm guessing I have the "old style" because mine do stay in the up position when replacing the blades or cleaning the windshield. PS, I have a 2001.

2003? I have 2005 and mine wouldn't stay up. I replaced them with your models version. I also installed 2 drivers sides as the drivers side has 2 sprayers and passenger just one.

strutaeng · Nov 4, 2024

ScottyBoy said:
Excuse my ignorance, but whats the difference between the "old" and "new style " wiper arms? And what year did they change them? I'm guessing I have the "old style" because mine do stay in the up position when replacing the blades or cleaning the windshield. PS, I have a 2001.

latvius said:
2003? I have 2005 and mine wouldn't stay up. I replaced them with your models version. I also installed 2 drivers sides as the drivers side has 2 sprayers and passenger just one.

Yep, the old style stay folded up position. It's nice when you want to wash your windshield, especially on the lower portion where the wipers sit and trap dirt and stuff.

I had 99 (which do fold up), and 04 and 06. The later 2 don't fuld up, so I would believe 03 is when that changed?

Also, out of all those wiper arms, the passenger side had 2 squirters and the driver has one squirters. But I couldn't tell the actual arm apart from driver vs passenger. I marked them just in case. It's good to know they are interchangeable.

Fless · Nov 4, 2024

ScottyBoy said:
Excuse my ignorance, but whats the difference between the "old" and "new style " wiper arms? And what year did they change them? I'm guessing I have the "old style" because mine do stay in the up position when replacing the blades or cleaning the windshield. PS, I have a 2001.

Here are the pics of the differences:

What did you do to your NBS GMT800 Tahoe/Yukon Today?

@TheEnder53; How do you like the aftermarket sealed LED assemblies? Did they come aligned pretty well / easy to get the beams aligned? I have been looking at those for a while. They came aligned very well. Only issue I noticed was the housings not lining up perfectly with the headlight...

www.tahoeyukonforum.com

latvius · Nov 4, 2024

Rewrapped that big bundle of engine wires.

Got rid of this crumbling mess

Installed a nice new wrap and since I have never seen a T connection wrap look good why not cover it up with a spiffy new 3d printed T-cover!

Keviebear86 · Nov 4, 2024

Finally installed my new tires
305/55R20 Bridgestone Dueler Ascent
Had to trim the liners, edges of the bumper attachments, and some of the rocker area to get complete turning radius. So far so good.

viven44 · Nov 4, 2024

Finally fixed the mode door actuator and also took care of the DTC B3761. It has some idiosyncrasies in how it wants to be programmed… I wonder if this is sometimes misdiagnosed as logic lock up. More details below.

02 Yukon Climate control gremlins

Hi there! I got a few grelims on the climate controls on the 02 Yukon, nothing outrageous. I don't know how these work yet, do they run off vacuum or if they electrically actuated... (well I think I have figured out that part... sounds like electric) ? Issues: 1) Few weeks ago when I plugged...

www.tahoeyukonforum.com

Mudsport96 · Nov 4, 2024

Nothing fancy just filled it up and went to visit the kid at college. Head wind the whole way there 16.6 mpg at 70mph. Tail wind the whole way home and got 22.5 mpg at 70

TEXCHEVY · Nov 5, 2024

Today new tail lamps for my Chevy

What did you do to your NBS GMT800 Tahoe/Yukon Today?

strutaeng

Full Access Member

Attachments

ScottyBoy

Full Access Member

latvius

Full Access Member

strutaeng

Full Access Member

Fless

What did you do to your NBS GMT800 Tahoe/Yukon Today?

latvius

Full Access Member

Keviebear86

Full Access Member

Attachments

viven44

Senior Member

02 Yukon Climate control gremlins

Mudsport96

Full Access Member

TEXCHEVY

Full Access Member

Attachments

Similar threads

Forum statistics

Latest posts